PDP-11/94-E

[Glen Slick]

On Wed, Jun 1, 2016 at 11:05 AM, Rod Smallwood
<rodsmallwood52 at btinternet.com> wrote:
>
> You could if you were able to get into ODT.  I have yet to discover how you
> get there.
>

Read the manual. See that setup option K is the Halt on Break option
which has a factory default setting of 0, which ignores console breaks
from the terminal Break key. If you set that option to 1 it enables
the processor to halt if the console SLU detects a break condition
from the Break key on the terminal, which should cause console ODT
mode to be entered.

http://www.bitsavers.org/pdf/dec/pdp11/1193/
EK-KDJ1E-UG-001_KDJ11-E_CPU_Module_Users_Guide_Jan91.pdf

3.2 Console ODT Entry Conditions

4.2.6 Setup Command
4.2.6.2 Setup Mode Command 2 • Select Configuration Parameters
K - Halt-on-Break
Table 4-12 Halt-on-Break Parameter Variations