Nova 3 front panel

[Vincent Slyngstad]

From: jim stephens: Thursday, July 21, 2016 9:53 PM
> I have not had time to figure out the driver circuit for any of the 
> lamps to see what that may turn up, and wanted to know whether it was 
> 28v lamps before I buy 40 of them.  (the thing has only 2 out of a lot 
> of lamps).

I mentioned http://www.foxdata.com/blog/tag/nova-312/ to you 
earlier, which suggested the 28V bulbs.  I also found
http://www.chookfest.net/nova3/ledmod.html
which makes it clear that the voltage is likely a fair bit over 12V.

The DG Components guide only lists part numbers for the 
28V bulbs, 24V bulbs, 5V, and 6V bulbs (at least that I found 
that fit with the wire base and the form factor).  I think installing 
28V bulbs in 24V circuits would be fine (they'd last longer).

Alas, I have no authoritative information on the exact correct 
bulb.

    Vince