Good memory board for Heath H-11?

[Richard Cini]

I just picked up an M8044-CC (16kw) so that should hold me for a while. I need to print the manual so I can set the switches right. 

Thanks all!

Sent from my iPhone

> On Feb 9, 2016, at 10:47 PM, Jerome H. Fine <jhfinedp3k at compsys.to> wrote:
> 
> >Rich Cini wrote:
> 
>> Thanks guys. This is really helpful. I was getting confused between the M8044 and M7944 boards. Max memory for the LSI-11 is 32kw, right?
> Correct, the maximum memory on a board is 32kw.
> 
> For an LSI-11 (aka PDP-11/03) without any MMU hardware,
> the actual maximum memory that can be accessed must also allow
> for the IOPAGE registers.  Usually, the IOPAGE address range
> is 4 kw which leaves 28kw for everything else, including RT-11
> (assuming that is what you are running).  There is one option
> available with some hardware to reduce the address range
> set aside for the IOPAGE to just 2kw which then leaves
> 30kw for everything else.  Unless you are running a specific
> program which requires the extra 2kw, it is probably not
> worth the extra effort.
> 
> Jerome Fine