looking for keytronics keyboard pad replacement kit

[william degnan]

One other thing....my use of the term "pad"...There is the metallic disk
"pad" that goes on top of the foam pad.  I should have said metallic disk
when referring to the contact that sits on top of the foam pad.
b

On Mon, Dec 12, 2016 at 8:47 AM, william degnan <billdegnan at gmail.com>
wrote:

> Upon closer inspection, these are pads only.  I am looking for the pads
> with new metallic contacts attached, too.  The metallic pads also decay and
> need to be replaced.  I have been able to re-use some but they're never
> 100% good.  The surface gets coated with something that causes them to
> loose the desired properties and cleaning does not always help.  I have a
> punch to create my own pads, and I *could* make metallic pads from a space
> blanket or similar but I was hoping to find pre-made-ready-to-use
> replacement pads instead.  I could use 4 sets.
>
> Bill
>
> On Mon, Dec 12, 2016 at 6:51 AM, william degnan <billdegnan at gmail.com>
> wrote:
>
>> Thanks.  I was searching with the wrong terms.
>>
>> Bill Degnan
>> twitter: billdeg
>> vintagecomputer.net
>> On Dec 12, 2016 1:19 AM, "Peter Cetinski" <pete at pski.net> wrote:
>>
>>>
>>> > On Dec 11, 2016, at 5:17 PM, william degnan <billdegnan at gmail.com>
>>> wrote:
>>> >
>>> > There was a seller on ebay who had a set of the pre-made keyboard key
>>> pads
>>> > for sale...anyone here selling these?  Yes I could make my own, I have
>>> gone
>>> > through the process, but I'd like to buy a set or two as I have a few
>>> > keyboards to repair.  it's a time consuming process.
>>> > Thanks in advance.
>>> > Bill
>>>
>>> He’s still out there
>>>
>>> http://www.ebay.com/itm/Victor-9000-SIRIUS-1-Keyboard-repair
>>> -Foam-Pads-for-KeyTronic-Keyboards/121266887970
>>
>>
>