VAX file format conversion
Ian S. King
isking at uw.edu
Thu Aug 11 21:57:24 CDT 2016
On Thu, Aug 11, 2016 at 6:56 PM, Douglas Taylor <dj.taylor4 at comcast.net>
wrote:
>
>> Ian ;
>
> I set the baud rate for 300, it was torture, but it worked. However, on
> the vax I had to make sure the terminal width was set to 132.
>
> The license file ran past 80 characters occasionally and screwed things
> up, because the Vax would 'wrap' those lines.
>
> The next hurdle is to get the networking functioning again. Are there any
> tricks I should know about concerning the AUI to 10BaseT adapters?
>
> It has been about a dozen years since I last did this and at that time it
> was working.
>
> Doug
>
>
It's not so much the baud rate but the character rate, at least for
something like a VAX. For a PDP-8, baud rate is important, too!
I have used (and continue to use) a lot of those AUI-TP adapters, and they
all seemed to be plug-and-play. I've also used old network hubs with BNC
connectors to do thinnet networks - necessary for some of my machines. Oh,
ISTR that a lot of VAXstations did have a button near the AUI and BNC
connectors asking you to choose. Choose wisely, Grasshopper, and you shall
be rewarded with packet traffic. Cheers -- Ian
--
Ian S. King, MSIS, MSCS, Ph.D. Candidate
The Information School <http://ischool.uw.edu>
Dissertation: "Why the Conversation Mattered: Constructing a Sociotechnical
Narrative Through a Design Lens
Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org>
Value Sensitive Design Research Lab <http://vsdesign.org>
University of Washington
There is an old Vulcan saying: "Only Nixon could go to China."
More information about the cctalk
mailing list