How to get a Heathkit H8 to work with a serial terminal

[dwight]

Hi

 Note that the combo card does not work reliably above

4800 baud. It feeds the serial through an optical isolator,

even when doing RS232. It is really intended to do current loop

at lower speeds.

Dwight


________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Bill Sudbrink <wh.sudbrink at verizon.net>
Sent: Monday, August 1, 2016 6:01:21 PM
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: How to get a Heathkit H8 to work with a serial terminal

Try in the SEBHC group:

sebhc at googlegroups.com