Keys - Non-Ace was RE: ACE Key codes (xx2247 etc.)

Mike Stein mhs.stein at gmail.com
Tue Apr 19 23:22:56 CDT 2016


----- Original Message ----- 
From: "Paul Koning" <paulkoning at comcast.net>
To: "General Discussion: On-Topic Posts" <cctech at classiccmp.org>
Sent: Tuesday, April 19, 2016 4:24 PM
Subject: Re: Keys - Non-Ace was RE: ACE Key codes (xx2247 etc.)



> On Apr 19, 2016, at 4:15 PM, Mike Stein <mhs.stein at gmail.com> wrote:
> 
> I finally found my micrometer; is there a cross-reference of pin # vs. depth or just a list of standard depths for ACE keys somewhere?

Look here, http://www.hpcworld.com/mobile/km/pocketcutup/index.html, click "See the manual", it's at the bottom of the first page.

----------------

Well, that doesn't quite match Fred's numbers below, but close enough:

http://www.locksafesystems.com/depth_and_space.htm#Chicago_Tubular_Space_and_Depth
> The depths by number are:
> 1 - 0.0155"
> 2 - 0.0310"
> 3 - 0.0465"
> 4 - 0.0620"
> 5 - 0.0775"
> 6 - 0.093"
> 7 - 0.1085"
> 8 - 0.1240"

So, assuming I did it right the code for the XX4306 key used in some Cromemco models is 5514457; anybody else want to confirm that?

m


More information about the cctalk mailing list