PDP-11/05 restoration project - anyone has a M7810 or M781?

[tony duell]

> 
> The plan is to get it to work with the 8kW core memory, M7800 connected to
> a good old teletype and PC05 paper-tape reader / punch and then run paper
> tape BASIC on it or other paper tape software.


> The problem is that I am lacking in the M7810 board. Since I do have a M105
> and M7821 a M781 could do as well.

Why do you need a second serial port? The PDP11/05 CPU board set has a built-in
UART set to the console port address. In general it was set to be 110 baud, and 
has a current loop interface, but that's just what you need for a teletype.

-tony