Trying to get my RLV11 working

[Ben Sinclair]

For 18 bit addresses, I assume I would look at 74400 instead? I get
177777 there.

I did just try moving the RLV11 boards below everything else (except
the BDV11), with the same results as before.

On Wed, Oct 28, 2015 at 12:29 PM, Johnny Billquist <bqt at update.uu.se> wrote:
> On 2015-10-28 18:25, Ben Sinclair wrote:
>>
>> I just tried to read 774400 from ODT, and it just gives the question
>> mark. So, I don't think it's seeing it at all right now! I'll try
>> moving it next.
>
>
> I wonder if it really uses 18 bit addresses in the console.
>
>         Johnny
>
>
>>
>> On Wed, Oct 28, 2015 at 11:46 AM, Ben Sinclair <ben at bensinclair.com>
>> wrote:
>>>
>>> No magic smoke so far!
>>>
>>> I think you had written something a while back that would test that
>>> interrupt. Was that correct, or is there another diagnostic I can use
>>> to test that?
>>>
>>> The 17440 wasn't a typo, it's just my misunderstanding of how the
>>> addressing works. I'll read the actual location later today and see
>>> what I find!
>>>
>>> On Wed, Oct 28, 2015 at 11:43 AM, Noel Chiappa <jnc at mercury.lcs.mit.edu>
>>> wrote:
>>>>
>>>>      > From: Ben Sinclair
>>>>
>>>>      > According to the Microcomputer Interfaces Handbook, my H9273
>>>> backplane
>>>>      > should be all ABCD.
>>>>
>>>> Yup, that was one of the first things I checked - whilst realizing that
>>>> if
>>>> it wasn't, it was too late... :-)
>>>>
>>>>      > Am I correct in that I shouldn't have any problem using the RLV11
>>>> in
>>>>      > that backplane?
>>>>
>>>> Not that I am aware of.
>>>>
>>>>          Noel
>>>
>>>
>>>
>>>
>>> --
>>> Ben Sinclair
>>> ben at bensinclair.com
>>
>>
>>
>>
>
>
> --
> Johnny Billquist                  || "I'm on a bus
>                                   ||  on a psychedelic trip
> email: bqt at softjar.se             ||  Reading murder books
> pdp is alive!                     ||  tryin' to stay hip" - B. Idol



-- 
Ben Sinclair
ben at bensinclair.com