H960 logo panel

[Rod Smallwood]

I could use the H960 its attached to!!!

Rod

On 12/10/2015 17:58, Henk Gooijen wrote:
> The "Galway" panel is much more common in Europe than the
> "Massachusettes" one. That one is more r at re over here :-)
>
> @Noell:  yes, please take a nice picture of it! You can email
> it directly to me, file size does not matter. The higher the
> resolution the better!   Or store at a repository, more guys
> probably want to download it.
>
> - Henk
>
>
> -----Oorspronkelijk bericht----- From: Rod Smallwood
> Sent: Monday, October 12, 2015 5:56 PM
> To: General Discussion: On-Topic and Off-Topic Posts
> Subject: Re: H960 logo panel
>
> That would have been from the Kanata factory.
> The Irish (Galway) factory did same thing as they were both building to
> client order.
>
> Rod
>
>
> On 12/10/2015 16:14, Noel Chiappa wrote:
>> So, I recently acquired a machine which has an unusual "digital 
>> equipment of
>> canada, ltd." pdp11 logo panel at the top of the H960 it's in.
>>
>> Is there anyone who would really have a connection to a panel with 
>> that on it?
>> (Let me hasten to add that I have nothing _against_ it, and would be 
>> happy to
>> leave it there, but maybe someone out there is dying to have one.) If 
>> so, I'd
>> be more than happy to swap this one for a plain pdp11 logo panel 
>> (i.e. one
>> that says "digital equipment corporation").
>>
>> Also, if anyone wants a scan of this, let me know, and I'll crank one 
>> out.
>>
>>        Noel
>

-- 
Wanted : KDJ11-E M8981 KK8-E M8300 KK8-E M8310 KK8-E M8320 KK8-E M8330