PDP-11/10 repair started

[william degnan]

good news as far as power supply goes.

On Mon, Oct 5, 2015 at 4:02 PM, Henk Gooijen <henk.gooijen at hotmail.com>
wrote:

> -----Oorspronkelijk bericht----- From: william degnan Sent: Monday,
> October 05, 2015 8:59 PM To: General Discussion: On-Topic and Off-Topic
> Posts Subject: Re: PDP-11/10 repair started
> What are the DC LO and AC LO values off the backplane?  Do they change when
> you insert the CPU card.  (one at a time).
> --
> Bill
> vintagecomputer.net
>
> =========
> I measured AC LO and DC LO with a scope while both CPU boards are in
> the backplane. Both measured 4.6 V, there was a ripple of 130 mV
> (looked like a sawtooth signal). I did not see spikes.
>
> - Henk
>



-- 
Bill
vintagecomputer.net