Front Panel Update

Rod Smallwood rodsmallwood52 at btinternet.com
Mon Jun 8 12:54:12 CDT 2015


Hi
     Its a full size 8/e front panel.
Its made to be a replacement for damaged front panels on real PDP8/e's
I doubt it would fit anything else.

There is a possibility of  a lights and switches panel to go with it if 
we can solve the
problem of  the lack of the lever operated switches that are a feature 
of the PDP8

However its a case of  if you don't have an 8/e now or are building one 
then this panel is not for you.

Rod G8DGR


On 08/06/2015 18:21, Dave G4UGM wrote:
> Is this appropriate for an SBC6120 or does that need different  switch labels ...
>
>> -----Original Message-----
>> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Rod
>> Smallwood
>> Sent: 08 June 2015 13:20
>> To: General at classiccmp.org; Discussion at classiccmp.org:On-Topic and Off-
>> Topic Posts
>> Subject: Front Panel Update
>>
>> Hi All
>>                Since I released the picture of the first 8/e panel on Friday there has
>> been a big response.
>> Its 12:45 local on Monday in the UK and I'm of to the silk screeners to collect
>> the rest of the first batch and to arrange for more to be printed as soon as I
>> get the blanks from the plastics supplier.
>> I'll send out  what I have to fullfill as many of the orders I have so far as I can.
>>
>> I have learned an awful lot just based on the inquires I have so far.
>> I see the following as requirements
>>
>>
>>        1.     Full size reproductions of the original panels useing the
>> same methods.
>>
>>        2.     High quality
>>
>>        3.    Custom one off service for important restorations.
>>
>>        4.     There's more demand than I thought.
>>
>>        5.      So far its all been for DEC systems
>>
>>
>> And yes they would look good just hung on the wall
>>
>> Next up an accurate reproduction of the bezel.
>>
>> And after that a lamps and switches board when and if I solve the Stackpole
>> switch levers issue.
>>
>> Please send in your orders so I can allocate production/shipping slots.
>>
>> Regards
>>
>> Rod Smallwood
>>
>>
>>
>>
>



More information about the cctalk mailing list