IBM-11 Card Punch

[Dave G4UGM]

Here is another piccy from Newcastle...

http://history.cs.ncl.ac.uk/anniversaries/40th/images/ibm370_1682/26.jpg

I think there were 2250's in that room as well, and a couple of storage
scope terminals...

Dave

> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Marc
> Verdiell
> Sent: 21 February 2015 10:02
> To: cctalk at classiccmp.org
> Subject: RE: IBM-11 Card Punch
> 
> Great work and cute card punch! Some similarly gifted folks at CHM are
just
> rebuilding an IBM 01 right now, and it's equally cute and minimalist and
bullet
> proof. They tell me it's how you'd re-punch a bad card in a hurry in the
middle
> of a jammed job.
> 
> I can't resist a shameless plug at my own 029 restoration. Machine
discovery
> and hauling back from Kansas to California courtesy of Carl Claunch, who
has
> been busy since getting the IBM 1130 (and own 029) he brought back into
> action. But this extra 029 gave me a satisfying, if modest, first electro-
> mechanical restoration project, from nothing working at all to full up.
> 
> https://www.youtube.com/watch?v=YnnGbcM-H8c&list=PL-
> _93BVApb59yIG2RELONEYOzJ
> 3lMXsqV
> 
> Marc
> 
> On Fri, Feb 20, 2015 at 6:10 AM, Dave G4UGM <dave.g4ugm at gmail.com>
> wrote:
> 
> > Folks,
> > Some time ago I bought an IBM Model-11 electro-mechanical punch on E-
> Bay.
> > It
> > was in a bit of a mess as someone had partially dismantled it and not
> > re-assembled it properly. It was also missing a couple of the
> > operating buttons. I have had some replacement parts made, and
> > re-assembled it properly. It now works reasonably well. I have made a
> > short video of it operating here:-
> > http://youtu.be/ogplYeEYzu8
> > Hope you enjoy this.
> > Dave Wade
> > G4UGM
>