XY11 Manual, Anyone?

[Dave G4UGM]

Surely there is a copy of CalComp Host Computer Basic Software (HCBS) around somewhere that talks to the XY11. After all the Calcomp is pretty thick. All it can do is move 1 step at once, well it can do diagonals as well, but pretty thick...

Dave
G4UGM

> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Stefan
> Skoglund (lokal användare)
> Sent: 23 December 2015 11:07
> To: cctalk at classiccmp.org
> Subject: Re: XY11 Manual, Anyone?
> 
> 
> > > Then for software I found a diagnostic, XXYAD0 that supposedly
> > > should draw a square and a rectangle.
> > >
> > > Anyone know of other drawing software that uses the XY11
> > >
> > > /Mattis
> >
> > The book 'The Minicomputer in the Laboratory' by James W Cooper covers
> > using an X-Y plotter with an 11/05, and has assembly listings and a
> > whole bunch of related stuff about scientific plotting. Also a lot of
> > info on using the LPS-
> > 11 too.
> > There are plenty of copies out there and quite cheap too. It's an
> > excellent book and could be of use to you.
> >
> > Steve.
> >
> 
> Boken finns i Umeå universitets boksamling (även på
> fysikinstitutionen.)
> Det verkar inte finnas något exemplar i Uppsala däremot. :-) Kastad ?