VAX 4000-500 PSU Overload?

[Robert Jarratt]

> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Holm
Tiffe
> Sent: 21 December 2015 08:51
> To: General Discussion: On-Topic and Off-Topic Posts
> Subject: Re: VAX 4000-500 PSU Overload?
> 
> Robert Jarratt wrote:
> 
> >
> >
> 
> Just resolder the SMD Caps, they sometimes get a loose pad.
> You see if that happened while resoldering.
> 

Shouldn't I be able to detect a loose component by pushing on it with a
small screwdriver or something? I suspect the caps are the darker coloured
(orange) ones, but I am not sure, is that right?

Thanks

Rob