VMS 5.4 AUTHORIZE issues

[Sean Caron]

Nice one! A big'un and fully loaded, too!

You tried this procedure? Always worked for me.

http://h71000.www7.hp.com/openvms/journal/v1/atw.pdf

Best,

Sean


On Wed, Aug 26, 2015 at 2:25 PM, Kyle Owen <kylevowen at gmail.com> wrote:

> Just picked up a very complete MicroVAX 3800. I have very little experience
> with VMS as this is my first VAX. Mostly a PDP-8 guy, I suppose.
>
> I'm running through the change password procedure, which I had seen
> mentioned previously on this list:
>
> SET VAXCLUSTER 0
> SET /STARTUP OPA0:
> SET WRITESYSPARAMS 0
> CONTINUE
>
> SET NOON
> SPAWN /NOWAIT SYS$SYSTEM:STARTUP.COM
> SET DEFAULT SYS$SYSTEM
> RUN AUTHORIZE
>
> At this point, I get this:
> %DCL-W-ACTIMAGE, error activating image SECURESHRP
> -CLI-E-IMGNAME, image file
> R7CY2A$DIA0:[SYS0.SYSCOMMON.][SYSLIB]SECURESHRP.EXE;2
> -SYSTEM-F-PROTINSTALL, protected images must be installed
> $
>
> What would I need to do to correct it to login?
>
> The eventual goal is to get this online, which should be feasible. I have
> an AUI-to-10Base-T adapter (several, actually). I think that'll be a little
> while away for now, though.
>
> Here are some pictures: http://imgur.com/a/WYGra
>
> Thanks,
>
> Kyle
>