Probs w. M3119 CXY08 MUX on VAX VMS 7.3
Holm Tiffe
holm at freibergnet.de
Tue Aug 18 07:17:08 CDT 2015
Holm Tiffe wrote:
> Johnny Billquist wrote:
>
> > On 2015-08-18 11:31, Holm Tiffe wrote:
> > >Jerry Weiss wrote:
> > >
> > >>Sorry if some of the suggestions aren?t appropriate, was just throwing a
> > >>few things out.
> > >>
> > >>
> > >>$analyze/error/since=today/full/include=tx
> > >>
> > >>Can you post a sample of the output for one of the lines that has an
> > >>error?
> > >>
> > >>Regards,
> > >>Jerry
> > >>
> > >
> > >Hmm...
> > >
> > >
> > >$analyze/error/since=yesterday/full/include=tx
> > >Error Log Report Generator Version V7.1
> > >%ERF-F-INVQUAVA1, value 'TX' invalid for /INCLUDE qualifier
> > >$
> > >
> > >I've looked over what was reported with $analyze/error/since=yesterday/full
> > >but haven't found anything interesting ..
> >
> > Not sure why /include=tx was suggested. I don't think that makes sense.
> > Anyway, you found a way around that. Otherwise, the device name should
> > be used, which should have been TT I believe.
> >
> > But I would expect there to be some information in the error log as your
> > error count is non-zero. Strange...
> >
> > Things that would be interesting to check more is that you really have
> > the right device type and driver installed.
> >
> > Johnny
>
> I've pulled the card in the meantime and looked at the Qbus connectors
> from the backplane using a lamp..they are looking nice (there lives a
> really tiny spider in there, but I dont' think that it would hurt something
> :-) No way to pull it out w/o dismantling the machine).
> Now I have connected 5 Volts to the xtal oscillator at the pcb, unfortunately
> it is ok also, 4,5Vss and the frequency is correct.
> Now I'm resoldering the PLCC housed gate array on the board with hotair, but
> I don't think that it would change anything, the soldering points are
> looking good so far.
>
> :-(
>
> after that I will retest the board and looking again to the error log.
> Please be patient..
>
..ok, nothing has changed (as expected) :-(
The additional VT420 is connected to txa3: and I haven't changed the term
parameters since reboot:
$ sh term txa3:
Terminal: _TXA3: Device_Type: Unknown Owner: No Owner
Input: 9600 LFfill: 0 Width: 80 Parity: None
Output: 9600 CRfill: 0 Page: 24
Terminal Characteristics:
Interactive Echo Type_ahead No Escape
No Hostsync TTsync Lowercase No Tab
Wrap Scope No Remote No Eightbit
Broadcast No Readsync No Form Fulldup
No Modem No Local_echo Autobaud No Hangup
No Brdcstmbx No DMA No Altypeahd Set_speed
No Commsync Line Editing Overstrike editing No Fallback
No Dialup No Secure server No Disconnect No Pasthru
No Syspassword No SIXEL Graphics No Soft Characters No Printer Port
Numeric Keypad No ANSI_CRT No Regis No Block_mode
No Advanced_video No Edit_mode No DEC_CRT No DEC_CRT2
No DEC_CRT3 No DEC_CRT4 No DEC_CRT5 No Ansi_Color
VMS Style Input
$
I've tried 5 times to copy systartup_vms.com to txa3: since reboot:
$ copy SYSTARTUP_VMS.COM txa3:
%COPY-E-WRITEERR, error writing TXA3:[]SYSTARTUP_VMS.COM;5
-RMS-F-WER, file write error
-SYSTEM-F-TIMEOUT, device timeout
%COPY-W-NOTCMPLT, SYS$COMMON:[SYSMGR]SYSTARTUP_VMS.COM;5 not completely
copied
$
sh dev counts 5 errors for the tty line:
Device Device Error
Name Status Count
FTA0: Offline 0
OPA0: Online 0
TNA0: Offline 0
TNA2: Online 0
TXA0: Online 0
TXA1: Online 0
TXA2: Online 0
TXA3: Online 5
TXA4: Online 0
TXA5: Online 0
TXA6: Online 0
TXA7: Online 0
VTA0: Offline 0
But I see nothing in the error log regarding this.
Here comes the error log from analyze/error/since=today/full/output=huf
-------------------------------------------------------------------------
******************************* ENTRY 472. *******************************
ERROR SEQUENCE 130. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 11:12:31.08 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:20
SCS NODE: V4300 VAX/VMS V7.3
SYSTEM START-UP KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
TIME OF DAY CLOCK 862C0023
******************************* ENTRY 473. *******************************
ERROR SEQUENCE 131. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 11:12:32.19 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:21
SCS NODE: V4300 VAX/VMS V7.3
MOUNT VOLUME KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
UNIT _DISK0$DIA0:, VOLUME LABEL "OVMSVAXSYS"
689. QIO OPERATIONS THIS UNIT, 0. ERRORS THIS UNIT
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:12:59
PAGE 1.
******************************* ENTRY 474. *******************************
ERROR SEQUENCE 132. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 11:12:54.76 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:44
SCS NODE: V4300 VAX/VMS V7.3
DEVICE ATTENTION KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
"DSA" PORT SUB-SYSTEM, UNIT _V4300$PUA0:, INIT SEQUENCE COMPLETED
SA 40D6
CONTROLLER MICRO-CODE #6.
PORT IS KDA50Q
STEP 4
INIT SEQUENCE
UCB$W_PORTSTEP1 0B00
ENHANCED DIAGNOSTICS IMPLEMENTED
22-BIT HOST ADDRESSING SUPPORTED
STEP 1
UCB$W_HOSTSTEP1 A49B
INTERRUPT VECTOR 000154(OCTAL)
INTERRUPT ENABLE
16. RING RESPONSE SLOTS
16. COMMAND RING SLOTS
UCB$W_PORTSTEP2 10A4
16. RING RESPONSE SLOTS
16. COMMAND RING SLOTS
STEP 2
UCB$W_HOSTSTEP2 C490
UCB$W_PORTSTEP3 209B
INTERRUPT VECTOR 000154 (OCTAL)
INTERRUPT ENABLE
STEP 3
UCB$W_HOSTSTEP3 0003
MAPPING REGISTER #482 SELECTED
UCB$W_PORTSTEP4 40D6
CONTROLLER MICRO-CODE #6.
PORT IS KDA50Q
STEP 4
UCB$W_HOSTSTEP4 0403
GO
HOST REQUESTS "LAST FAIL"
CONTROLLER SCRATCHPAD PRESENT
"BURST" 2. 16-BIT TRANSFER(S)
MAPPING ALLOCATION INFORMATION
VEC$L_MAPREG 000E81E2
"MPR" #482. STARTING MAP REGISTER
"MPR"(S) PERMANENTLY ALLOCATED
14. MAP REGISTER(S) ALLOCATED
DIRECT DATAPATH
ORB$L_OWNER 00010004
OWNER UIC [001,004]
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:12:59
PAGE 2.
UCB$L_CHAR 0C450000
SHARABLE
AVAILABLE
ERROR LOGGING
CAPABLE OF INPUT
CAPABLE OF OUTPUT
UCB$W_STS 0000
UCB$L_OPCNT 00000000
0. QIO'S THIS UNIT
UCB$W_ERRCNT 0001
1. ERRORS THIS UNIT
UCB$W_NUMBINITS 0001
1. INIT SEQUENCE
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 3.
******************************* ENTRY 475. *******************************
ERROR SEQUENCE 133. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 11:12:54.77 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:44
SCS NODE: V4300 VAX/VMS V7.3
DEVICE ATTENTION KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
"DSA" PORT SUB-SYSTEM, UNIT _V4300$PTB0:, INIT SEQUENCE COMPLETED
SA 4034
CONTROLLER MICRO-CODE #4.
PORT IS TK50P
STEP 4
INIT SEQUENCE
UCB$W_PORTSTEP1 0BC0
PORT SUPPORTS ADDRESS MAPPING
PORT ALLOWS HOST ODD ADDRESSES
ENHANCED DIAGNOSTICS IMPLEMENTED
22-BIT HOST ADDRESSING SUPPORTED
STEP 1
UCB$W_HOSTSTEP1 A4B0
INTERRUPT VECTOR 000300(OCTAL)
INTERRUPT ENABLE
16. RING RESPONSE SLOTS
16. COMMAND RING SLOTS
UCB$W_PORTSTEP2 10A4
16. RING RESPONSE SLOTS
16. COMMAND RING SLOTS
STEP 2
UCB$W_HOSTSTEP2 8C90
UCB$W_PORTSTEP3 20B0
INTERRUPT VECTOR 000300 (OCTAL)
INTERRUPT ENABLE
STEP 3
UCB$W_HOSTSTEP3 0003
MAPPING REGISTER #70 SELECTED
UCB$W_PORTSTEP4 4034
CONTROLLER MICRO-CODE #4.
PORT IS TK50P
STEP 4
UCB$W_HOSTSTEP4 0403
GO
HOST REQUESTS "LAST FAIL"
CONTROLLER SCRATCHPAD PRESENT
"BURST" 2. 16-BIT TRANSFER(S)
MAPPING ALLOCATION INFORMATION
VEC$L_MAPREG 000E81C6
"MPR" #454. STARTING MAP REGISTER
"MPR"(S) PERMANENTLY ALLOCATED
14. MAP REGISTER(S) ALLOCATED
DIRECT DATAPATH
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 4.
ORB$L_OWNER 00010004
OWNER UIC [001,004]
UCB$L_CHAR 0C450000
SHARABLE
AVAILABLE
ERROR LOGGING
CAPABLE OF INPUT
CAPABLE OF OUTPUT
UCB$W_STS 0000
UCB$L_OPCNT 00000000
0. QIO'S THIS UNIT
UCB$W_ERRCNT 0001
1. ERRORS THIS UNIT
UCB$W_NUMBINITS 0001
1. INIT SEQUENCE
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 5.
******************************* ENTRY 476. *******************************
ERROR SEQUENCE 134. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 11:12:54.77 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:44
SCS NODE: V4300 VAX/VMS V7.3
ERL$LOGMESSAGE KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
"DSA" PORT SUB-SYSTEM, UNIT _V4300$PUA0:
MESSAGE TYPE 0004
UDA PORT MESSAGE
MSLG$L_CMD_REF 00000000
MSLG$W_SEQ_NUM 0000
SEQUENCE #0.
MSLG$B_FORMAT 00
CONTROLLER LOG
MSLG$B_FLAGS 01
SEQUENCE NUMBER RESET
UNRECOVERABLE ERROR
MSLG$W_EVENT 0010
RECORD DATA TRUNCATED
MSLG$Q_CNT_ID 00D60000
01020000
UNIQUE IDENTIFIER, 000000D60000(X)
MASS STORAGE CONTROLLER
UDA50
MSLG$B_CNT_SVR D6
CONTROLLER SOFTWARE VERSION #214.
MSLG$B_CNT_HVR 04
CONTROLLER HARDWARE REVISION #4.
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 6.
******************************* ENTRY 477. *******************************
ERROR SEQUENCE 135. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 11:12:54.84 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:44
SCS NODE: V4300 VAX/VMS V7.3
DEVICE ATTENTION KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
TK70P SUB-SYSTEM, V4300$PTA0:
FAILED TO LOCATE PORT MICRO-CODE IMAGE
******************************* ENTRY 478. *******************************
ERROR SEQUENCE 136. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 11:14:04.39 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:01:53
SCS NODE: V4300 VAX/VMS V7.3
MOUNT VOLUME KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
UNIT _DISK2$DIA2:, VOLUME LABEL "DATA2"
12. QIO OPERATIONS THIS UNIT, 0. ERRORS THIS UNIT
******************************* ENTRY 479. *******************************
ERROR SEQUENCE 137. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 11:23:02.82 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:10:52
SCS NODE: V4300 VAX/VMS V7.3
TIME STAMP KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
******************************* ENTRY 480. *******************************
ERROR SEQUENCE 138. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 11:30:48.62 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:18:37
SCS NODE: V4300 VAX/VMS V7.3
DISMOUNT VOLUME KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
UNIT _DISK2$DIA2:, VOLUME LABEL "DATA2"
17. QIO OPERATIONS THIS UNIT, 0. ERRORS THIS UNIT
5. QIO OPERATIONS THIS VOLUME, 0. ERRORS THIS VOLUME
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 7.
******************************* ENTRY 481. *******************************
ERROR SEQUENCE 139. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 11:30:58.08 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:18:47
SCS NODE: V4300 VAX/VMS V7.3
FATAL BUGCHECK KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
OPERATOR, Operator requested system shutdown
******************************* ENTRY 482. *******************************
ERROR SEQUENCE 140. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 13:43:24.27 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:20
SCS NODE: V4300 VAX/VMS V7.3
SYSTEM START-UP KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
TIME OF DAY CLOCK 8639D08A
******************************* ENTRY 483. *******************************
ERROR SEQUENCE 141. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 13:43:25.39 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:21
SCS NODE: V4300 VAX/VMS V7.3
MOUNT VOLUME KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
UNIT _DISK0$DIA0:, VOLUME LABEL "OVMSVAXSYS"
689. QIO OPERATIONS THIS UNIT, 0. ERRORS THIS UNIT
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 8.
******************************* ENTRY 484. *******************************
ERROR SEQUENCE 142. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 13:43:48.59 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:45
SCS NODE: V4300 VAX/VMS V7.3
DEVICE ATTENTION KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
"DSA" PORT SUB-SYSTEM, UNIT _V4300$PUA0:, INIT SEQUENCE COMPLETED
SA 40D6
CONTROLLER MICRO-CODE #6.
PORT IS KDA50Q
STEP 4
INIT SEQUENCE
UCB$W_PORTSTEP1 0B00
ENHANCED DIAGNOSTICS IMPLEMENTED
22-BIT HOST ADDRESSING SUPPORTED
STEP 1
UCB$W_HOSTSTEP1 A49B
INTERRUPT VECTOR 000154(OCTAL)
INTERRUPT ENABLE
16. RING RESPONSE SLOTS
16. COMMAND RING SLOTS
UCB$W_PORTSTEP2 10A4
16. RING RESPONSE SLOTS
16. COMMAND RING SLOTS
STEP 2
UCB$W_HOSTSTEP2 C450
UCB$W_PORTSTEP3 209B
INTERRUPT VECTOR 000154 (OCTAL)
INTERRUPT ENABLE
STEP 3
UCB$W_HOSTSTEP3 0003
MAPPING REGISTER #482 SELECTED
UCB$W_PORTSTEP4 40D6
CONTROLLER MICRO-CODE #6.
PORT IS KDA50Q
STEP 4
UCB$W_HOSTSTEP4 0403
GO
HOST REQUESTS "LAST FAIL"
CONTROLLER SCRATCHPAD PRESENT
"BURST" 2. 16-BIT TRANSFER(S)
MAPPING ALLOCATION INFORMATION
VEC$L_MAPREG 000E81E2
"MPR" #482. STARTING MAP REGISTER
"MPR"(S) PERMANENTLY ALLOCATED
14. MAP REGISTER(S) ALLOCATED
DIRECT DATAPATH
ORB$L_OWNER 00010004
OWNER UIC [001,004]
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 9.
UCB$L_CHAR 0C450000
SHARABLE
AVAILABLE
ERROR LOGGING
CAPABLE OF INPUT
CAPABLE OF OUTPUT
UCB$W_STS 0000
UCB$L_OPCNT 00000000
0. QIO'S THIS UNIT
UCB$W_ERRCNT 0001
1. ERRORS THIS UNIT
UCB$W_NUMBINITS 0001
1. INIT SEQUENCE
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 10.
******************************* ENTRY 485. *******************************
ERROR SEQUENCE 143. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 13:43:48.60 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:45
SCS NODE: V4300 VAX/VMS V7.3
DEVICE ATTENTION KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
"DSA" PORT SUB-SYSTEM, UNIT _V4300$PTB0:, INIT SEQUENCE COMPLETED
SA 4034
CONTROLLER MICRO-CODE #4.
PORT IS TK50P
STEP 4
INIT SEQUENCE
UCB$W_PORTSTEP1 0BC0
PORT SUPPORTS ADDRESS MAPPING
PORT ALLOWS HOST ODD ADDRESSES
ENHANCED DIAGNOSTICS IMPLEMENTED
22-BIT HOST ADDRESSING SUPPORTED
STEP 1
UCB$W_HOSTSTEP1 A4B0
INTERRUPT VECTOR 000300(OCTAL)
INTERRUPT ENABLE
16. RING RESPONSE SLOTS
16. COMMAND RING SLOTS
UCB$W_PORTSTEP2 10A4
16. RING RESPONSE SLOTS
16. COMMAND RING SLOTS
STEP 2
UCB$W_HOSTSTEP2 8C50
UCB$W_PORTSTEP3 20B0
INTERRUPT VECTOR 000300 (OCTAL)
INTERRUPT ENABLE
STEP 3
UCB$W_HOSTSTEP3 0003
MAPPING REGISTER #70 SELECTED
UCB$W_PORTSTEP4 4034
CONTROLLER MICRO-CODE #4.
PORT IS TK50P
STEP 4
UCB$W_HOSTSTEP4 0403
GO
HOST REQUESTS "LAST FAIL"
CONTROLLER SCRATCHPAD PRESENT
"BURST" 2. 16-BIT TRANSFER(S)
MAPPING ALLOCATION INFORMATION
VEC$L_MAPREG 000E81C6
"MPR" #454. STARTING MAP REGISTER
"MPR"(S) PERMANENTLY ALLOCATED
14. MAP REGISTER(S) ALLOCATED
DIRECT DATAPATH
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 11.
ORB$L_OWNER 00010004
OWNER UIC [001,004]
UCB$L_CHAR 0C450000
SHARABLE
AVAILABLE
ERROR LOGGING
CAPABLE OF INPUT
CAPABLE OF OUTPUT
UCB$W_STS 0000
UCB$L_OPCNT 00000000
0. QIO'S THIS UNIT
UCB$W_ERRCNT 0001
1. ERRORS THIS UNIT
UCB$W_NUMBINITS 0001
1. INIT SEQUENCE
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 12.
******************************* ENTRY 486. *******************************
ERROR SEQUENCE 144. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 13:43:48.60 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:45
SCS NODE: V4300 VAX/VMS V7.3
ERL$LOGMESSAGE KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
"DSA" PORT SUB-SYSTEM, UNIT _V4300$PUA0:
MESSAGE TYPE 0004
UDA PORT MESSAGE
MSLG$L_CMD_REF 00000000
MSLG$W_SEQ_NUM 0000
SEQUENCE #0.
MSLG$B_FORMAT 00
CONTROLLER LOG
MSLG$B_FLAGS 01
SEQUENCE NUMBER RESET
UNRECOVERABLE ERROR
MSLG$W_EVENT 0010
RECORD DATA TRUNCATED
MSLG$Q_CNT_ID 00D60000
01020000
UNIQUE IDENTIFIER, 000000D60000(X)
MASS STORAGE CONTROLLER
UDA50
MSLG$B_CNT_SVR D6
CONTROLLER SOFTWARE VERSION #214.
MSLG$B_CNT_HVR 04
CONTROLLER HARDWARE REVISION #4.
V A X / V M S SYSTEM ERROR REPORT COMPILED 18-AUG-2015 14:13:00
PAGE 13.
******************************* ENTRY 487. *******************************
ERROR SEQUENCE 145. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 13:43:48.67 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:45
SCS NODE: V4300 VAX/VMS V7.3
DEVICE ATTENTION KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
TK70P SUB-SYSTEM, V4300$PTA0:
FAILED TO LOCATE PORT MICRO-CODE IMAGE
******************************* ENTRY 488. *******************************
ERROR SEQUENCE 146. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 13:43:53.42 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:00:49
SCS NODE: V4300 VAX/VMS V7.3
MOUNT VOLUME KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
UNIT _DISK1$DIA1:, VOLUME LABEL "DATA1"
12. QIO OPERATIONS THIS UNIT, 0. ERRORS THIS UNIT
******************************* ENTRY 489. *******************************
ERROR SEQUENCE 147. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 13:45:13.75 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:02:10
SCS NODE: V4300 VAX/VMS V7.3
MOUNT VOLUME KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
UNIT _DISK2$DIA2:, VOLUME LABEL "DATA2"
12. QIO OPERATIONS THIS UNIT, 0. ERRORS THIS UNIT
******************************* ENTRY 490. *******************************
ERROR SEQUENCE 149. LOGGED ON: SID 0B000006
DATE/TIME 18-AUG-2015 14:04:12.27 SYS_TYPE 01340401
SYSTEM UPTIME: 0 DAYS 00:21:08
SCS NODE: V4300 VAX/VMS V7.3
TIME STAMP KA670-AA CPU FW REV# 6. CONSOLE FW REV# 3.4
ANALYZE/ERROR/SINCE=18-AUG-2015 00:00:00.00/FULL/OUTPUT=HUF
-------------------------------------------------------------------------
What makes me wonder is that I've wrote that the vector of the card schould
be 300...but:
$ mcr sysgen
SYSGEN> SH/CONF
System CSR and Vectors on 18-AUG-2015 14:11:12.81
Name: PAA Units: 1 Nexus:0 (CI )
Name: PAB Units: 1 Nexus:1 (CI )
Name: EZA Units: 4 Nexus:2 (NI )
Name: PUA Units: 1 Nexus:3 (UBA) CSR: 772150 Vector1: 154 Vector2: 000
Name: PTA Units: 1 Nexus:3 (UBA) CSR: 774500 Vector1: 260 Vector2: 000
Name: PTB Units: 1 Nexus:3 (UBA) CSR: 760404 Vector1: 300 Vector2: 000
Name: TXA Units: 8 Nexus:3 (UBA) CSR: 760440 Vector1: 310 Vector2: 314
SYSGEN>
...floating vector?
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
More information about the cctalk
mailing list