General Electric Terminet HP 2762A

[Lee Courtney]

JIm - nice! I used one of these when I was at HP in the late-70s/early-80s.
Can also post a macro picture of the entire unit in addition to the
close-ups? Thanks! Lee C.

P.S. The Google authentication to post on your blog is broken. Didn't try
the others.

On Thu, Apr 30, 2015 at 3:29 AM, jwsmobile <jws at jwsss.com> wrote:

>
> I recently acquired a GE Terminet 300 in the guise of an HP 2762A
> terminal, KSR.  I am attaching what I have so far in my blog.
>
> I've found little on the technical side for this terminal.  If anyone has
> a manual I'd appreciate a copy.
>
> It is referenced in one listing of HP manuals, 02762-90001 the service
> manual.  I'm not sure what to make of the one hit I get on that P/N that
> isn't bitsavers mirrors.  I figured I'd ask here first.  I'll also ask on
> the hp equipment group, I am on there too.
>
> hpmuseum.net is welcome to my photos, or contact me offline, and I'll
> make some better quality shots for your web site.
>
> I plan to get this going to use for the Multics Simulator at some point.
> The TN300 was a common console, and was an early symptom of the
> featureless, non-blink'n lites type shop that came to be.  I know the
> Honeywell 6180 that ran Multics had an 8 panel service panel with wonderful
> sets of lights, but it was hidden in a cabinet, and typically not accessed
> by the operator.
>
> thanks
> Jim
>
>
> http://jimsoldtoys.blogspot.com/2015/04/2762a-terminal-printer-ge-terminet-300.html
>
>


-- 
Lee Courtney
+1-650-704-3934 cell