VAX 4000-300 Available in the UK

Jarratt RMA robert.jarratt at ntlworld.com
Wed Apr 1 16:11:09 CDT 2015


The machine has now been collected, and is travelling to its new home in
good hands.

Thanks

Rob

On 31 March 2015 at 03:20, Ian S. King <isking at uw.edu> wrote:

> Thanks for passing that along, Rob!  Cheers -- Ian
>
> On Sun, Mar 29, 2015 at 10:53 PM, Robert Jarratt <
> robert.jarratt at ntlworld.com> wrote:
>
> > It has been claimed, so it is going to a good home.
> >
> > Regards
> >
> > Rob
> >
> > > -----Original Message-----
> > > From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Ian
> S.
> > King
> > > Sent: 30 March 2015 01:45
> > > To: General Discussion: On-Topic and Off-Topic Posts
> > > Subject: Re: VAX 4000-300 Available in the UK
> > >
> > > I have a running 4000/300, and these are a very nice machine - it's my
> > usual
> > > go-to VMS box.  I hope someone picks it up and gives it some TLC!
> > >
> > > On Thu, Mar 26, 2015 at 1:05 PM, Jarratt RMA <
> > robert.jarratt at ntlworld.com>
> > > wrote:
> > >
> > > > I have a VAX 4000-300 that I want to pass on as I don't have room for
> > it.
> > > > It is in a BA440 enclosure (marked VAX 4000-400). The CPU board had a
> > > > couple of problems, the levers that are used to push it into the slot
> > > > have been broken, however it will push into the slot OK and work. The
> > > > onboard Ethernet (SGEC) is also not working, but I have included a
> > > > DESQA so you can network it. It has 64MB of memory (2x 32MB). It also
> > has a
> > > CXY08 board.
> > > >
> > > > It does not have any disks because I want to keep the few DSSI disks
> I
> > > > have, however I will include two DSSI covers. You can still boot it
> as
> > > > a satellite of course. In fact I was toying with the idea of putting
> a
> > > > Raspberry Pi inside the enclosure with a crossover LAN cable and
> > > > running if off SIMH on that.
> > > >
> > > > It is free, however I would appreciate a small donation, as it has
> > > > cost me money to collect it to save it from being dumped.
> > > >
> > > > It is in the UK, in South Manchester. Although I am currently working
> > > > a lot in Coventry so could bring it to that area. I will also be at
> > > > DEC Legacy in Windermere 11-12 April, although I would prefer to
> leave
> > > > room in my car for the machines I want to exhibit, if possible.
> > > >
> > > > Regards
> > > >
> > > > Rob
> > > >
> > >
> > >
> > >
> > > --
> > > Ian S. King, MSIS, MSCS, Ph.D. Candidate The Information School
> > > <http://ischool.uw.edu>
> > >
> > > Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org>
> > Value
> > > Sensitive Design Research Lab <http://vsdesign.org>
> > >
> > > University of Washington
> > >
> > > There is an old Vulcan saying: "Only Nixon could go to China."
> >
> >
>
>
> --
> Ian S. King, MSIS, MSCS, Ph.D. Candidate
> The Information School <http://ischool.uw.edu>
>
> Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org>
> Value Sensitive Design Research Lab <http://vsdesign.org>
>
> University of Washington
>
> There is an old Vulcan saying: "Only Nixon could go to China."
>


More information about the cctalk mailing list