Relay question

[Mike Stein]

Well, gee, if you're going to use a DPST pushbutton anyway, then all you 
need is a single impulse relay like the original suggestion.

m

----- Original Message ----- 
From: "Chuck Guzis" <cclist at sydex.com>
To: <General at classiccmp.org>; "Discussion at classiccmp.org:On-Topic and 
Off-Topic Posts" <cctalk at classiccmp.org>
Sent: Saturday, November 29, 2014 12:17 AM
Subject: Re: Relay question


> On 11/28/2014 06:41 PM, Brent Hilpert wrote:
>
> ...
>
> So, this can be the basis:
>
> https://www.circuitlab.com/circuit/4ndbv7/toggle-relay-flip-flop/
>
> Add a 3rd DPDT relay with the coil connected to the Q output as a 
> reversing switch.  The pushbutton (DPST) should have a second set of 
> contacts to control main power to the motor.
>
> --Chuck
>
>