Whitesmith C install

[Dave G4UGM]

Jeff,
 You may need to set digest mode. There was a database error and some of the options may have been lost. To adjust your subscriptions go to:-

http://www.classiccmp.org/mailman/listinfo/cctalk

put your e-mail in the last box and hit "unsubscribe or edit options". You may need to set a password to proceed.

Dave
G4UGM
P.S. I copied everyone as others may need to tweak their options.

> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Jeff Erwin
> Sent: 04 November 2014 15:08
> To: General Discussion: On-Topic and Off-Topic Posts
> Subject: Re: Whitesmith C install
> 
> How can I unsubscribe from this list?
> 
> The threads used to come in once a day or so, now I am getting an email for
> every response.
> 
> jefferwin at gmail.com
> 
> On Tue, Nov 4, 2014 at 6:55 AM, Johnny Billquist <bqt at update.uu.se> wrote:
> 
> > On 2014-11-04 15:36, E. Groenenberg wrote:
> >
> >>
> >> I'm trying to install the Whitesmiths C compiler under RSX11M using
> >> FLX (using the Whiteshmiths c compiler distribution tape V2.25 from
> >> bitsavers).
> >>
> >> Alas, 'FLX' says the tape has zero files and directories, while a
> >> dump under Linux shows definitely some contents.
> >>
> >> I tried both the simh & tpc format, no luck here yet.
> >>
> >> Am I missing something?
> >>
> >> The command I used is 'flx /rs=ms0:[*,*]/do'
> >>
> >
> > Have you tried just listing the directories with FLX to see if you see
> > anything?
> > Also, isn't there some installation script for doing the installation?
> > Or are you just expected to copy everything over from the tape?
> >
> > I have never played with the Whitesmith C compiler myself, but I could
> > check it out, now that I know it exists...
> >
> >         Johnny
> >
> >