PDP-11/84 SLU problem?

[John Rollins]

So in function checking the PDP-11 now that the Series/1 is out of the basement and I have room to move the unit around and plug it in, I have discovered that it doesn't appear to transmit data from the console port on the back. I have tried two terminals(WY99) and two different PC's(Windows laptop with hardware serial port and a Mac with a USB adapter) with various software, a half dozen different cables, and every conceivable switch setting on the PDP with nothing to show for it aside from a lot of time spent the last couple of weekends.

So when I power up, the LED display on the front counts down through the numbers and stops at 4. As near as I can tell, this is something of a good sign. But nothing ever comes up on a connected terminal. Sometimes pressing keys on the terminal results in the RUN light turning off, other times it does nothing. This would seem to indicate that the PDP knows that something is trying to talk to it, but it is not sending data out.

Short of spending an entire day disassembling half the machine and tracing every wire hoping to find something out of place, does anyone have any ideas on what may be happening here, or what to look for?


------------
John Rollins  |  KD7BCY  |  http://www.kd7bcy.com
Ham-Mac mailing list http://mailman.qth.net
------------