Search results for "retroarchive.org" - test-drb@ccmp.vtda.org

CP/M and Imsai

by ajp166＠bellatlantic.net

From: Bill Sudbrink <wh.sudbrink(a)verizon.net> >You should add that it is a real kick when you finally get >everything right and the sucker actually boots and works! That's still the best reason to do it. It's a total immersion project and once done there are few parts of the system that will not be understood at the software (maybe hardware too) level. >All of my boxes that run CP/M run 2.2 built from the source >found at the "unofficial CP/M web site": Some of those I copied to Tim! I was useing them back when to build mine, from the emergence of V2.2 on. >http://www.retroarchive.org/cpm/archive/unofficial/ Da place! >Finding a build environment is left as an exercise for the reader. I recommend MyZ80 as a starting point. Then work the hardware dependent stuff iteritively on the target via serial download. Allison

22 years, 9 months

Will trade classic H/W for CP/M 2.2 help!

by ajp166＠bellatlantic.net

From: Lance Costanzo <lance(a)costanzo.net> >Speaking of CP/M and DRI, here's some web sites that may be of interest: >http://www2.gol.com/users/joewein/dri.html >http://members.iinet.net.au/~daveb/cpm/index.html >http://www.faqs.org/faqs/CPM-faq/ >http://www.retroarchive.org/cpm/ >http://members.aol.com/wwheco1/commscpm.htm >http://www.maxframe.com/GARY&CPM.HTM >http://www.daml.org/people/jflynn/algolm.html You can also get CP/M source and binaries, and online docs at http://www/cpm.z80.de >>You can buy a "new" licensed copy of CP/M (the original DR version) from >>California Digital for only $9 at http://www.cadigital.com/software.htm. It >>won't be set up for your particular computer, though, but does have the DR >>manuals. only $9 and you get a manual? dang! The manuals are a good deal alone. Allison

23 years, 7 months

Contemporary XT Software: cctalk Digest, Vol 126, Issue 7

by geneb＠deltasoft.com

On Tue, 4 Feb 2014, FidoNetDan at aol.com wrote: > Not much here, for DOS. but a lot for old systems > > http://www.retroarchive.org/ > I've actually added a mirror of the old Garbo archive this past summer and I'm currently working on getting the Vetusware mirror pulled. I'm rate-limiting the wget so I don't smash the poor guy though. It'll take a while for it to finish. > > Dan > > FidoNetDan > Sysop of FogLine - FidoNet node 1:14/627 > Greetings from 1:138/142! :D g. -- Proud owner of F-15C 80-0007 http://www.f15sim.com - The only one of its kind. http://www.diy-cockpits.org/coll - Go Collimated or Go Home. Some people collect things for a hobby. Geeks collect hobbies. ScarletDME - The red hot Data Management Environment A Multi-Value database for the masses, not the classes. http://scarlet.deltasoft.com - Get it _today_!

10 years, 11 months

P112 [Don Maslin Archive]

by jwsmail＠jwsss.com

On 12/1/2019 8:19 AM, Peter Coghlan via cctalk wrote: > > On 2019/11/30 23:32:55 -0800, jim stephens via cctalk wrote: >> On 11/30/2019 9:45 PM, Eric Dittman via cctalk wrote: >>> On 11/30/2019 8:34 PM, jim stephens via cctalk wrote: >>>> > > [snip] > >> >> Links.txt >> > > [snip] > >> http://www.classiccmp.org/dunfield/img/index.htm >> ???? Daves Old Computers - Disk/Software Images. Boot disks for lots >> ???? of different vintage computers are here. It's not nearly the >> ???? size of Don Maslin's lost archive, but it's a start. >> > > I don't keep up with CP/M etc but I thought I recall it being > announced that Don Maslin's lost archive had been recovered? > Here's the archive http://www.retroarchive.org/maslin/ P112 I think is way newer than anything related though. > Regards, > Peter Coghlan. > >

5 years, 1 month

classiccmp status

by geneb＠deltasoft.com

On Sat, 17 Nov 2012, Fred Cisin wrote: > On Sat, 17 Nov 2012, Jay West wrote: >> 1) Due to the generosity of Richard (with myself making up the balance >> of the cost), > > THANK YOU, BOTH! > I'll second this. Jay is also host to retroarchive.org. > >> that we'll host any service for free that is vintage computer related >> - not just websites. We'll host mailing lists, ftp or rsyncd >> repositories, whatever you wish. > > THAT makes me wish that I knew how to set up a GOPHER Ask Cameron. He'll get you straightened out. :) g. -- Proud owner of F-15C 80-0007 http://www.f15sim.com - The only one of its kind. http://www.diy-cockpits.org/coll - Go Collimated or Go Home. Some people collect things for a hobby. Geeks collect hobbies. ScarletDME - The red hot Data Management Environment A Multi-Value database for the masses, not the classes. http://www.scarletdme.org - Get it _today_!

12 years, 2 months

A quandry....

by geneb＠deltasoft.com

Thanks James. g. On Thu, 10 Oct 2002, James Rice wrote: > Actually, I prefer pdf format. I tend to store documentation on CD's > and print if necessary. The pdf format is much easier to print and > handle, no editing of links, etc. > > Just my opinion, > > James > > Gene Buckle wrote: > > >I'm in the process of OCR'ing a full set of the Staunch 8/89'er > >newsletters for addition to the Commercial CP/M Archive. > > > >My problem is that while HTML renderings of the newsletters is acceptable, > >the PDF version that ABBYY FineReader generates is spectacular. > > > >Do you folks think I should produce them as PDF, HTML or both? > > > >Thanks. > > > >g. > >http://www.retroarchive.org > > > > > > > > > > > > > > > -- > http://webpages.charter.net/jrice54/classiccomp2.html > > > >

22 years, 3 months

Aztec C (was Re: XT 5160)

by acme＠gbronline.com

Kevin Handy wrote: > Fred N. van Kempen wrote: > >> Yes, sorry. It was Aztec. Very neat little compiler. On more >> thought, it did NOT have a Make included, I believe I stole the >> one from Borland, or some PD make. >> >> >> Gawd, I would love a copy of that compiler again, especially if >> they used the (more or less same) codebase for several backends, >> most of which I use ;-) >> >> --f >> >> >> > Probaly not the version you are looking for, but: > > http://www.retroarchive.org/cpm/lang/lang.htm Hmm. I recall porting a fairly large application from Hitech C (CP/M-80) to Aztec C 3.02 (CP/M-86) a couple of years ago and running into all kinds of foolishness with it, particularly regarding function prototypes and struct pointers. Easy enough to fix with some conditional compilation #defines, but still a pain. Glen 0/0

19 years, 8 months

Apple II Colour Demodulator

by thrashbarg＠kaput.homeunix.org

Hi, This might interest someone here, so I thought I'd post it. I've been working on a colour demodulator for my Apple //c. It converts the output to component video suitable for any television with component inputs. The original composite output of the //c becomes the luminance input and the circuit extracts the red and blue difference signals. It's not 100% perfect but it does display colour that mostly resembles the original NTSC colour palette. http://kaput.homeunix.org/appleii or http://kaput.retroarchive.org/appleii If you have two MC1496's, feel free to build it. I'd like to see if it works unmodified (or with any modifications) on an NTSC model Apple ][ or //. The reason why I made this is because I don't have a PAL modulator for my //c. My television does support NTSC, but the Australian version of the machine doesn't output the correct timings for NTSC... it was designed to be attached to the PAL modulator. Cheers, Alexis.

12 years, 11 months

CP/M and Imsai

by wh.sudbrink＠verizon.net

> This is the S-100 world you've entered, not the PC world. The BIOS doesn't go > into an EPROM, and you don't buy the BIOS. If you can't find one written for > your EXACT hardware environment, which you usually can't, you have to write it > yourself. Then you have to incorporate it into a bootable image of CP/M and > then find a way to propagate it onto a bootable diskette. > > That will require some study and some effort. Hopefully you're endowed with > enogh free time and interested enough in the related tasks to get that done. You should add that it is a real kick when you finally get everything right and the sucker actually boots and works! All of my boxes that run CP/M run 2.2 built from the source found at the "unofficial CP/M web site": http://www.retroarchive.org/cpm/archive/unofficial/ Finding a build environment is left as an exercise for the reader.

22 years, 9 months

The best CP/M machine ever? was Re: Kaypro II

by geneb＠deltasoft.com

For they Kaypro fans in the audience, you might want to stop over here: http://www.retroarchive.org/docs/magazines/profiles/index.html I've scanned a ton of the Kaypro Profiles magazines. They're not OCRed however. If you have an issue that would fill a hole in the collection, please let me know! (Note with magazines, I do destructive scanning - the binding is sheared off and fed into a high-speed duplexing scanner) g. -- Proud owner of F-15C 80-0007 http://www.f15sim.com - The only one of its kind. http://www.diy-cockpits.org/coll - Go Collimated or Go Home. Some people collect things for a hobby. Geeks collect hobbies. ScarletDME - The red hot Data Management Environment A Multi-Value database for the masses, not the classes. http://www.scarletdme.org - Get it _today_! Buying desktop hardware and installing a server OS doesn't make a server-class system any more than sitting in a puddle makes you a duck. [Cipher in a.s.r]

12 years, 4 months

test-drb search results for query "retroarchive.org"