On 1998-07-10 Chris said:
cl>I recall seeing mentioned somewhere a URL from Finland that has
cl>info and archives for MicroVAXen. Anybody know of that and could
cl>pass the URL on to me (and the list)?
Please take a look ar http://vaxarchive.ml.org, a site I am building
to be filled with VAX (and maybe PDP) info. Some data and a lot of
links are already there.
Kees
--
Kees Stravers - Geldrop, The Netherlands - pb0aia at amsat dot org
Sysadmin and DEC PDP/VAX preservationist - http://vaxarchive.ml.org
Net-Tamer V 1.08.1 - Registered
It just looked odd. It was like a regular PC case but smaller. It was
two shallow plastic tubs. At front, all there was was two 1/2 height
5.25" drives. The whole thing was about as tall as 1 full height. In the
back, it had the standard MB connectors (RS-232, Parallel), composite
RF, and a 9-pin video (I don't recall what type). It had one horizontal
expansion slot with the little cover missing. I peeked inside but
couldn't see the ISA connector.
>Could you elaborate on "peculiar" (and what is a Heathkit kit XT?). I
>have a peculiar-looking plastic computer from Heathkit called the
ET-3400,
>but it couldn't possibly be confused with an XT.
>
>-- Doug
>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Ethan,
The z80 believe it or not is still in production and has to be one of the
most common 8 bitters along with the 6502. It also has one of the bigger
resources for tools, code, and knowledge around.
< I gave away a couple of 68K S100 boxes to a friend a couple of years ago.
< Since then, I've gotten that Z80 Starter Kit with the S100 connectors. Wh
< sorts of boards might I be able to find for which there is Z80 code? Coul
Unlike PCs the z80 world doesn't really revolve so closely around boards
or one vendors word of how the OS is implemented.
So... it sorta makes the question open ended.
< I find/build a floppy controller and get some sort of CP/M BIOS ROM and
< turn it into a CP/M machine? I guess I'd need a serial port for a console
Getting a bios rom would be near impossible, as most cpm systems did not
do rom bios like PCs do! The bios was loaded at boot time. the loader was
a minimal chunk of code (as small or smller than 128 bytes) that loaded
the bios which then loaded the rest of the OS. That made the bios very
changable as the users discression. Writing your own bios and putting it
an eprom(or EEprom) is very doable. The book you need (or the chapter in)
is the CP/M alteration guide. that can be found at the site listed.
Finding more boards (assuming S100) is also not that hard. there are people
here that can help right here on classiccmp.
One development platform is to get MYZ80(it's on the web at the SIMTEL site)
a z80 and CP/M emulator that runs on 386 or higher dos(or win 3.x, maybe
w95) platforms. With that on your PC you can surf the web for tools and
apps needed to run languages, assemblers, debuggers and what have you to
develop code.
< at least a 5.25" controller, and BIOS source (with a cross assembler).
Any disk size/format you may want is doable from old single density 8" to
IDE or SCSI. You might find hardware for any or all, but 5.25/8" was
common. FYI: if your writing the code, most 8" double density controllers
with 765 or the more commonly used in that time frame WD179x can also do
3.5" formats.
< Anything else? Is 32K reasonable for CP/M, or should I go for 48K? The
For CP/M 32 is the minimum to do useful work even though you can run the
assembler and debuggers in 20k. A good system is 48 or better 56k with
some setup to switch out the eprom to get access to all 64k.
< only copy I happen to have, BTW, is an original CP/M distribution disk
< for the Commodore 128. Will that be adequate, or should I dig for somethi
< more generic?
The C128 is furthest from generic IMHO, but if you have a c128 it's a good
place to start as a development platform. FYI with notable exceptions CPM
(primary componenets are CCP, BDOS and BIOS) is generic for all 8080/8085
and z80 system and only the bios code is different as that's where all the
IO work is done for terminals and disks.
There is a CP/M website on the net where you can get binaries or even
sources as well as manuals.
I'd look here if I were you:
Visit the "Unofficial" CP/M Web site.
MAIN SITE AT : http://cdl.uta.edu/cpm
MIRROR AT : http://www.mathcs.emory.edu/~cfs/cpm
Applications, look at the FTP site at OAKLAND.EDU and SIMTEL, I'd guess
there are 20-30,000 programs out there and most with sources.
Good luck,
Allison
$>Set mode/device=tongue/position=incheek
< I'm desperately searching for an IMSAI 8080. I know you have all
< probably heard this before but does anyone know where I should start.
< I'm going to the MIT Swapfest this month and hoping to get lucky but
Desperate? I know people desperate for heart transplants or hardware
to keep their old maching going because it runs their business but,
really! ;-)
Done forget there are loads of other S100 hardware looing for homes and
also noteworthy!
Allison
Today, I saw a peculiar-looking all-plastic computer that was labelled
"Heath Computer Systems". Is this the Heathkit kit XT?
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
> 3. Odd DEC single-board computer. 10" x 7" labeled DEC 54-16489, Has two
> 84-pin PLCC chips
> with the LSI LIA 0433 and 0434 marks. Has a DB25, DB15, and DB9.
> Recognizable chips
> include 8051, FD1796, CDP 6402 (RCA), and D7201C (NEC) Can anyone
> identify this?
Offhand, it sounds like a DECmate, probably a III.
Roger Ivie
ivie(a)cc.usu.edu
What are the chances of getting one of the sets of 11/34 docs? I got one
of these and a set of docs would just rock!
Thanks
Tony
> -----Original Message-----
> From: Richard A. Cini, Jr. [mailto:rcini@email.msn.com]
> Sent: Friday, July 10, 1998 1:21 PM
> To: Discussion re-collecting of classic computers
> Subject: Oh, boy. What a haul!
>
>
> Hello, all:
>
> I made another trip to Temple University yesterday to
> rummage through
> their storehouse of old computers and documentation. I hate
> to post a list,
> but I don't have a working web site yet, and I want everyone
> to know what I
> have in case someone needs something.
>
> Here it goes...
>
> 1. Mac Portable (no HD, bad batteries)
> 2. Many Unibus and Q-Bus boards
> 3. Odd DEC single-board computer. 10" x 7" labeled DEC
> 54-16489, Has two
> 84-pin PLCC chips
> with the LSI LIA 0433 and 0434 marks. Has a DB25,
> DB15, and DB9.
> Recognizable chips
> include 8051, FD1796, CDP 6402 (RCA), and D7201C
> (NEC) Can anyone
> identify this?
> 4. Three Motorola 68K educational computers. Has 32k RAM,
> 68K, 6850,
> 14411 chips and a
> proto area. Also has two EPROMs. Any guess?
> 5. Three KIM-1s!! (There are one or two more left, too). Two are
> MOS-labeled, one is *brand new* from
> Conversational Voice Terminal Corp. of Chicago. Need
> data on this
> one. The MOS-labeled ones
> have 1976-dated ceramic chips.
> 6. A S-100 backplane from Forethought Products. Has 8
> slots, some glue
> and regulator chips.
> 7. Lots of documentation. A sampling...
> -- Intel: MCS80/85 User Guide (1983), Memory Handbook
> (83), Embedded
> Controller Book (88), Component Data Book (80; looks to be
> full-line), OEM
> Boards (87), 8080/85 Assembly Language Programming Manual,
> Applications
> Note --implementing a floppy system (1981).
> -- DEC: Logic handbook (77), Microcomputer
> Microprocessors (78)
> -- Motorola: MC68020 User Man., MEK6800 Guide, 6809 Assembly
> Language, 6800 Pgmr. Ref. Manual.
> -- Full documentation set for the Rockwell AIM-65
> computer (user
> guide, BASIC language, Programmers Manual, Hardware Manual,
> Monitor Program
> Listing).
> -- Textbooks on microprocessors by Tocci & Laskowski,
> and Camp, Smay
> & Triska
> 8. Old magazines. The guy who ran the CS department before
> the guy I know
> saved everything. Byte's going back to 1978 (too many to get
> this trip),
> Datamation, others that I never heard of. But, the jewel is
> that I came
> *this* close to getting the Altair issue of Popular Electronics.
> Unfortulately, this guy only had as far back as 1/76.
> Articles include:
> Cosmal Elf construction articles, SOL construction, build a Scientific
> Calculator, music with the 8080, TV Typewriter, SpeechLab,
> Computer Club
> listings, a personal microwave communications system, various
> Classic-relevant product reviews and buyer's guides.
> 9. DEC paper tapes: PDP-11 power fail, LPS11 tests,
> General Test Program,
> RK05 dynamic test, RK11 utilities, exerciser, static tests.
> 10. Complete print sets for the following: PDP 11/34A (two copies,
> complete), FP11, H960 cabinet, KSI-11, DLV-11, DL-11, H9720,
> ET-LSI-11,
> LSI-11 power supply, MS11, PC11, LPS11, MR11, M873, KD11F,
> RK05 (regular, F,
> and J).
>
> My plan is to scan the articles, and have an on-line
> database hanging
> off of a web site. I also want to implement a bar code system for my
> goodies. That'll take a while, though.
>
> Anyway, thanks for the bandwidth.
>
> Rich Cini/WUGNET <nospam_rcini(a)msn.com>
> - ClubWin! Charter Member
> - MCP Windows 95/Windows Networking
> - Preserver of "classic" computers
> <<<< ========== reply separator ========== >>>>>
>
>
>
> The question is, what was VM/SP? I know it was IBMs, and it ran on large
> mainframes. Where can I find information about it?
The only info I can find is in a couple of glossy brochures from IBM.
One is about the 9370, the other about the 3090 series. Respectively,
IBM Virtual Machine/System Product (VM/SP)
This is a multi-user, multi-processing operating system for
interactive processing. It provides productivity tools for
commercial and engineering/scientific environments, decision
support and program development. With its connectivity
enhancements, this system is particularly suited for remote sites
that have little or no programming staff.
and
Simple end-user interaction with VM
The VM/XA Systems Facility and the VM/SP High Performance Option
both provide a virtual machine environment. Together with the
Conversational Monitor System (CMS), they permit each end-user to
access the IBM 3090 system independently, with the perception that
he or she is the sole user. Communicating with the IBM 3090 via
VM/CMS, Vector Vacility users can develop, test and execute
vectorised applications online, using a comprehensive range of IBM
Assembler and FORTRAN compilers, libraries and productivity tools.
VM also provides guest System Control Program (SCP) support, not
only for other IBM SCPs but also for IX/370, IBM's implementation
of UNIX.
Sorry I can't be of further help.
Philip.
Oh, I'd really love to get my hands on some old Cromemco and Northstar
equipment too but the IMSAI is like a labor of love :)
Tony
> -----Original Message-----
> From: allisonp(a)world.std.com [mailto:allisonp@world.std.com]
> Sent: Friday, July 10, 1998 12:50 PM
> To: Discussion re-collecting of classic computers
> Subject: Re: Looking for...
>
>
>
> $>Set mode/device=tongue/position=incheek
>
> < I'm desperately searching for an IMSAI 8080. I know you have all
> < probably heard this before but does anyone know where I
> should start.
> < I'm going to the MIT Swapfest this month and hoping to get lucky but
>
> Desperate? I know people desperate for heart transplants or hardware
> to keep their old maching going because it runs their business but,
> really! ;-)
>
> Done forget there are loads of other S100 hardware looing for
> homes and
> also noteworthy!
>
>
> Allison
>
I'm desperately searching for an IMSAI 8080. I know you have all
probably heard this before but does anyone know where I should start.
I'm going to the MIT Swapfest this month and hoping to get lucky but
fear I will not.
Help!
Thanks,
Tony Dellett
anthony.dellett(a)staples.com
Last night I poked a little around the RA60 and the 11/34A that I want to
keep. I saw a cable ass'y attached to the RA60 which had two black cables
(about 7/8"wide x 3/8" thick) and relatively small plastic 8-pin connector
recepticles within a comparatively hefty backshell. Inside the 11/34A
cabinet there were a group of four of the same small mating connectors
which had four flat, red cables running from that group into a Unibus board
in the the BA11 (forgot module number). A 12-foot long cable with two 8-pin
plastic connectors each within a large backshell was laying inside the
11/34A box. I extrapulate from a couple of other private msgs that this is
probably the UDA50 interface. True?
Please tell me about this disk I/F. Any FAQ on it somewhere?
Also, I would like to find the same tech info or descriptions on the MSCP
interface which I understand the RL01s and RL02s have.
Can anyone give me any info on the TS03 tape unit? It is the only one I can
keep so I plan to lash it up to the 11/34A or maybe the 11/730 if I indeed
keep that (or both by swapping cables?)
Looks like a J-11 chip on the CPU board in an 11/23 chassis that was buried
in the pile (darn little thing was so small compared to the 5000+ pounds of
other boxen that I forgot to mention it in my first msg.) That's basically
an 11/73 isn't it?
More questions to come.....
Thanks so far, Chris
-- --
Christian Fandt, Electronic/Electrical Historian
Jamestown, NY USA
Member of Antique Wireless Association
URL: http://www.ggw.org/freenet/a/awa/
>1 - Heathkit H?? (like the Z89)
No doubt an H88. Generally there will be a Heathkit sticker on the back
with the model number. The Heathkit 88 and Zenith 89 are virtually the same
machine with differing name plates.
>there are two cards marked H8-4
>and H8-5. The H8-4 is a multi I/O card, and I have no idea what the H8-5
>is yet except that it has what appear to be audio cables coming from the
>card.
The H8-5 is a serial I/O and cassette interface card. I have the complete
documentation including the assembly instructions. From the Introduction:
"Your Heathkit Model H8-5 Serial I/O and Cassette Interface Card provides
you with two input/output ports to the Heath H8 Computer. One port provides
a cassette tape interface while the other port provides a serial I/O
port....
The Cassette tape interface, along with the H8 front panel monitor, provides
you with a fully automated Load and Dunp facility. This greatly increases
the system's usefulness by enabling you to store programs and data for later
use. The interface will automatically compensate for variations in tape
speed and will accept a wide range of input levels. Both high and low level
outputs are provided to match any tape unit you wish to use....
The serial I/O port normally operates with the system console. It provides
serial communications at speeds from 110 to 9600 Baud at either 20 mA or
RS-232 compatible levels...."
>1 - Heathkit Dual Floppy
>1 - Heathkit H-8 w/ H17 dual Floppy Drive
I you ever wish to part with either, let me know.
Cliff Gregory
cgregory(a)lrbcg.com
On Fri, 3 Jul 1998 blindpete(a)stratos.net wrote:
> Hi
>
> Yes a reality, and a nic name I got from some friends.
Then congrats on the Wang repair! Loss of eyesight is probably my
greatest fear.
> I used it mostly to write messages on from calls ect, I would leave it on
> all day, and get some help later on some one would read it back to me so I
> could braille it out.
What did you do when there was a power failure? :)
> The drive was ten MB and had Wang dos on it and the word prosser was also
> on it.
> The monotor was a Wang monotor, I don't know if they are still available.
Unlikely. Which is one reason I'm so peeved at the Salvation Army store
for tossing all of those old monitors and terminals.
> This Wang I had was baught at a flee market, a fellow had 20 or 30 of them
> he was selling complete for $25 about ten years ago.
Sounds like a good deal!
> A friend saw it and snagged one for me he knew I was interested in
> computers, and thought it would make a interesting birthday present for me.
> I sold it eventually because I couldn't het a sinthasiser that would work
> in the card slots, they worent ISA or any thing like that, not sure what
> they wore.
Some proprietary Wang bus, I presume. It's got 86 pins, at 0.125"
spacing.
> Pete
> Net-Tamer V 1.11 - Registered
Doug Spence
ds_spenc(a)alcor.concordia.ca
http://alcor.concordia.ca/~ds_spenc/
Hi all,
I went to a surplus store today and they had, I think, 2 Intel bubble memory
modules, about 4 x 4 cm x 1cm thick. Would anyone like me to look at or buy
them?
They also had a Commodore 64, beige with dark keys, modified with 2 BNC
jacks on the back. I could find no documentation that went with it. Their
price was $10 USD.
-Dave
Hi Doug and all,
At 03:32 AM 7/9/98 -0500, you wrote:
>On Thu, 9 Jul 1998, dave dameron wrote:
>
>> I went to a surplus store today and they had, I think, 2 Intel bubble memory
>> modules, about 4 x 4 cm x 1cm thick. Would anyone like me to look at or buy
>> them?
>
>FWIW, one day I needed a new bubble. I tracked down the company (MemTech
>at http://www.memtech.com/) that bought Intel Magnetics, and asked them
>the price for a new 128K bubble. I think it was $300+. I'll take the
>bubbles if they're under $5 each.
>
I went back, and could find only one! It was loose in a box of some small AC
power socket modules, could not find anything that it came out of. The price
was $4 +tax. It is an Intel Magnetics 7110-1 with a date code (I guess)
of 8204. There is a string of 80 Hex characters printed on it, mostly "F", a
320 bit error map
of some kind?
I will let you know if I find any more. I plan to go back to look more
anyway, there also appeared to be a cabinet with a 8 inch floppy
drive in it (horizontal). I couldn't really get at it to examine it closely.
(There was a bunch of bad UPS's around and on top of it).
-Dave
At 06:50 AM 7/9/98 PDT, you wrote:
>
>Interesting, I would guess that's for video, not ethernet though. Was it
>the thick one with the round old-style led or the 'c' thin model?
>The reason why I ask is that I wonder what they could have fit inside...
>
>>They also had a Commodore 64, beige with dark keys, modified with 2 BNC
>>jacks on the back. I could find no documentation that went with it.
>Their
>>price was $10 USD.
>>-Dave
>>
> From: Philip.Belben(a)powertech.co.uk
> Subject: Re[2]: PET 2001
> >> Or is it 9"? I can't check mine because they are both locked in my
> >> father's bedroom at this hour.
> >
> > 9". All the ones I've seen were 9".
9", 8" the Commodore ads said 9" display... But of course there is only about
8" showing... reminds me of that class-action monitor suit, (Our agency will
make $9 for the three monitors it bought a few years back, in 2000, I still
have the refund cards.)
> I agree with Pete, not that it makes much difference.
> >> Supposedly the 2001N and 2001B came with 12" screens, but I've never seen
> >> one.
>
> No. Never. 12 inch screen on 4032 (or possibly 4016) and above only.
the 12" models used the new video display chip (and newer motherboard
w/speaker) for which only 4.0 BASIC was coded, only the 4000 series.
[snip]
> First PETS: 2001-4 and 2001-8 (also called 4k PET and 8k PET). Blue trim,
> blue-white phosphor, mangled and rebadged cassette (I can't remember whose)
> that you open by lifting the lid.
they were SANYO decks, no tape eject button, you had to lift the lid, I have
two (one in the PET and one external!)
>
> Then: 2001-4 and 2001-8 get Black trim and C2N cassette deck
Black C2N, custom case, no counter. Nice looking deck too, I called that
design the 'brick' datasettes, the later cream 'brick' added a counter but
they wern't as reliable as the black ones. The best are the (VIC/64 era)
low-profile 1530s. Nice units!
>
> Then: Green screen.
>
> Next was the ROM upgrade. Usual models were 2001-8N, 2001-16N, 2001-32N,
> 2001-8B, 2001-16B and 2001-32B. These had full-sized keyboards and external
> C2N decks. In the UK, 2001-8N with tiny keyboard and built in C2N was
> common. This was not a new motherboard in an old case - the case was a
> different shape (slightly less tall). Larry has suggested that these might
> be the 2001-8K, K standing for Calculator (-style keyboard) (sic).
I got the 2001-8K from my Spring 1980 Commdoore Product Catalog, listed were:
PET 2001-8K Integeral cassette, upgrade (they list as 3.0) ROMs
PET 2001 Professional Computer (these were the N series, 8N, 16N, and 32N)
graphics full-sized keyboard.
CBM 2001 Business Computer (non-graphics keyboard, Upgade ROMs, etc.)
listed as 16B and 32B
CBM 8000 Business Computer (Available June 1980) 80 columns, 4.0 ROMs
listed as 8016 and 8032
[snip]
> >> PET 2001NT Teacher's PET. Same as 2001N, just rebadged
>
> I've never heard of 2001NT.
[snip]
>
> > Mine is just labeled "PET 2001-8K" I think, with no 'N' or 'B' anywhere,
> > but mine has a 9" screen and a full-size keyboard with graphics symbols.
>
> Strange. Full size keyboard with graphics symbols should be 2001-8N
Commodore was not a wasteful company (at least in the beginning,) maybe they
used an older label?? I would not put it past em.
> > cassette-beside-the-keyboard. I've got one here. And the /B and /N series
> > were called 3000's not 2001 everywhere except the USA. The 12" versions
>
> Are you sure? I thought the 2001-8N and 2001-8B got renamed 3008 a bit
> later.
Never saw a 3000 in my neck of the woods, though I did see pictures (like in
the PET Personal Computer Guide, etc.) I think they were more abundant in
Canada and the UK.
>
> > didn't appear in the UK until later. According to my (USA) manual, the
> > 2001/B (aka 3000 here) was a 9" screen too. IIRC, the 4000 was the first
> > with a 12" screen,
[bzzz] Read above, the 8000 was the first 12" model.
> > The 12" screen version was
> > eventually called the 8000 series here, and had different firmware (and
> > up to 96K RAM I think, bank-switched).
The difference between a 4000 and an 8000 is an extra k of screen RAM and the
video startup code in one of the ROM chips.
The 64k expansion board came later and was fully integrated lastly in the 8296
(mainly european release)
> Um. The first with the 12 inch screen was the 8032. Different firmware
> and re-done video circuitry. Later some of that was put into 4032,
> making the "fat 40" Bank switched RAM made an 8096...
>
> > One of the differences between the business and home versions (apart from
> > graphics symbols on the keytops) was whether the machine powered up in
> > upper- or lower-case.
>
> Was it? That's weird!
Yep, darned annoying if you like the graphics symbols. The 4000/8000 series
also extended the line height by a pixel or two (thanks to the new VDC) which
left a gap between lines, can be gotten around by printing CHR$(142)
-uppercase, no gaps- and then poking 59468,14 -set back to lower case-. It
was a routine in the screen printing code doing it.
I think three or four graphics symbols were readily unavailable, (you would
have had to print them out with CHR$()s and then build your program lines
around them) two of which I really liked to use, that PET (at school) did't
get used much by me... (=P)
> Take a couple of steps back and get a wider view:
>
> PET had two internal character codes.
[clip alot of tech stuff]
>
> And that was the second problem. Later PETS swapped lower and upper
> case letters. So now ASCII codes 65 and up, which still mapped onto
> screen codes 1 and up, gave LOWER case letters, but you pressed SHIFT
> for upper case. However the OS and BASIC (one and the same, really)
> treated unshifted as letters, and shifted as meaningless graphics
> characters, whichever mode you were in.
>
> Confused? It is, isn't it!
One of the Original to Upgrade ROM fixes...
You knew the programmer had an old ROM PET when the case in their text was inverted.
>
> >> ROMs (which I think came out in 1979?) fix both of those things.
>
> About then. The monitor - hex only - replaced diagnostic routines in
> the original ROMs. A listing was actually given in the original PET
> manual, but I couldn't get it to work whenever I typed it in...
I have it on a Commodore tape and the diagnostic tape too!
>
> >> I don't have a machine with BASIC 4.0, so I don't know how that starts
>
> It says "COMMODORE BASIC 4.0" but I can't remember whether between *** or
> ###.
>
*** COMMODORE BASIC *** Original ROM
### COMMODORE BASIC ### Upgrade ROM
*** COMMODORE BASIC 4.0 *** 4.0 ROMs
> >> Upgrade ROM machines also have a Microsoft easter egg in them
> >> whcih is missing from the original ROMs.)
>
> Indeed. Type WAIT 6502,100
and you get a screen full of MICROSOFT!
> > There was a very-short-lived BASIC-2, and BASIC-3 (more-or-less the upgrade
> > ROM set) was around for a while before 4. 4 has extra commands for the
> > disk, instead of having to use the generic IEEE channel commands, but
> > otherwise it's almost the same as 3.
Short lived?? - it seemed to be around for a few years to me...
> I have heard all sorts of numbering schemes for BASIC versions. The
> only thing they agree on is 4. AFAIK, the BASIC in 3008 and friends was
> identical to the upgrade ROMs that went in original PETs.
I go by Original, Upgrade, small screen 4.0, and large screen 4.0, and 80
column 4.0.
There were enough differences in the small and large screen 4.0 ROMs to keep
some 4.0 games from working on large screen PETs.
>
> > Only the original ROMs start up with ***; all of the later ones used ###.
>
> That clears up my mystery above. Thank you.
[bzzzz] *** were used in 4.0 too, but at least they did add 4.0 to the message.
>
> >> It might also be important to mention that the PET has a timer that
> >> operates in real time. And it has the same character set(s) as the VIC-20
except for the british pound symbol which replaced the PET's back-slash (\)
> >> and C64
the 64 set was 'pudgyier' to reduce video artifacting on TVs
but you can't switch between the upper/lower-case text character
> >> set and the upper-case/graphics set without issuing a POKE command. (Was
> >> it 49512,12 and 49512,14? My memory is rusty.)
>
> Hope this clears up some misconceptions.
and that is why I made the PET FAQ! ;)
--
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Larry Anderson - Sysop of Silicon Realms BBS (300-2400bd) (209) 754-1363
Visit my Commodore 8-Bit web page at:
http://www.goldrush.com/~foxnhare/commodore.html
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
>> About then. The monitor - hex only - replaced diagnostic routines in
>> the original ROMs. A listing was actually given in the original PET
>> manual, but I couldn't get it to work whenever I typed it in...
>
> Don't thoes diagnostics need loopback connectors for the user port (links
> things like video signals to the user port pins) and the keyboard
> connector?
They do indeed. I have a set somewhere. I was given them by another
PET owner who had bought them but never used them, being afraid he'd
damage the machine by so doing. I don't recall anything in the PET
circuit diagrams etc that suggested you could damage the PET with these,
but then again...
Philip.
At 05:15 PM 6/29/98 -0700, Sam Ismail wrote:
>>
>> > Didn't AOL get its start by being bundled with PC-GEOS?
>
>As far as I know, AOL used to be called AppleLink, which was an Apple
>online service.
I don't remember if it mutated into AOL, but there once was a
service called QuantumLink that sold branded network services
such as AppleLink and AmigaLink and probably a few more "Links".
- John
At 04:09 PM 7/5/98 -0700, you wrote:
>Ok, so I picked up an Apricot today for one whole dollar. I can't make
>out any model number anywhere on the unit. All I got was the main unit.
Check out <http://www.geocities.com/SiliconValley/4462/apricot.html> which
is "ACT Apricot computers" according to my bookmark file.
--------------------------------------------------------------------- O-
Uncle Roger "There is pleasure pure in being mad
roger(a)sinasohn.com that none but madmen know."
Roger Louis Sinasohn & Associates
San Francisco, California http://www.sinasohn.com/
Interesting, I would guess that's for video, not ethernet though. Was it
the thick one with the round old-style led or the 'c' thin model?
The reason why I ask is that I wonder what they could have fit inside...
>They also had a Commodore 64, beige with dark keys, modified with 2 BNC
>jacks on the back. I could find no documentation that went with it.
Their
>price was $10 USD.
>-Dave
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
First, get a book on CP/M (the operating system used by the Kaypro 10.)
If you need more detailed technical information or have trouble finding
a CP/M reference, send me e-mail.
Essentially, the Kaypro10 is a 4MHz Z-80 based CP/M machine with a 400Kb
floppy and a hard disk (I think.) It was often used for word processing,
usually with MicroPro's WordStar.
It has a *slow* modem, a serial port, and a parallel port.
I'm working on compiling some information on the Kaypro so it can be
emulated; once I do this, emulators may serve as "active documentation"
for this fine but somewhat obsolete line of computers.
At 02:55 AM 7/9/98 -0400, Doug Spence wrote:
>
>This just found in COMPUTE!'s Gazette magazine, March 1986, p.26:
>
>"Several months ago Commodore agreed to lend exclusive marketing support
>to a new online service, QuantumLink, which would be designed solely for
>Commodore owners. [...] says Steve Case, Quantum's vice president of
>marketing.
Wow, that's the guy. I didn't realize the link between QuantumLink
and AOL. What I do remember is that their services were incredibly lame
in terms of user interface, speed, national network, etc. compared to
Compuserve. For a while, Commodore shifted at least its developer
support to BIX, Byte's online service. A quick jump to www.bix.com
shows it's still alive, run by Delphi.
Hunt around in those issues from '87 to '90 or so, especially
Compute's Amiga magazine or coverage, and you'll find articles I
wrote. For a while, I had a by-lined monthly column there, with
my picture and everything. When it first appeared, my fans were
shocked to learn I was such a young guy. They thought I was an
old portly man with a beard.
- John
