test-drb

test-drb@ccmp.vtda.org

101090 discussions

by w2hx＠w2hx.com

?Hi all, I have a crashed RL01 disk (very crashed). I'd like to remove it from the plastic cover to display it. I opened up the case but cannot figure out how to remove the platter? I took 4 philips screws out which only served to remove a metal ring. It seems that the handle is somehow attached to the platter and seems it is preventing me from removing the platter. Whats the trick? Thanks Eugene

6 years, 11 months

KDJ11-E issue/info

by jnc＠mercury.lcs.mit.edu

> From: Nigel Johnson > Anybody have any docs on the DEC LSI 11/93 (KDJ11-E)? Info on the -E is thin on the ground. The User's Manual (EK-KDJ1E-UG-001) is available online, though, which is a start - it gives info on how to configure it, etc. > I am trying to run it in a BA23 backplane and seemingly geting bus > hangs as is there is something that it is looking for that is not > there! QBUS 11's are pretty resistant to hangs, unless you have an interrupted grant chain. A simple missing device should give a NXM fault. I"d try getting the whole system working with another CPU, and then plug in the -E; reduce the number of unknown variables. Although with memory and console line on-board on the -E, it shouldn't need too much else for at least basic functioning. Noel

6 years, 11 months

Wtd: advice upcoming visit to Bletchley Park / comp museum

by harper＠secureoutcomes-hq.com

Bill, If I were on such a tight schedule, I would as you say rent a car, but one-way, from Gatwick - drive that night late to a hotel in Milton Keynes about five miles north of Bletchley. About 90 miles Gatwick to Milton Keyes - two hours or so late at night. Avis has a return site at Milton Keynes. Leave the car there at Avis. Thursday morning, I would take a taxi to Bletchley Park - the place opens 0930. Spend 1.5 hours or some such max at Bletchley - Train back to Gatwick. I know that you can easily get to London Euston from Bletchley - trains run about every twenty minutes I recall, but I do not know how to get to Gatwick from Euston - figure that out. It would all be very tight, but Bletchley Park is an amazing place to see and only 1.5 hours there would be better than nothing. Here is a snap I took of the "Mansion" when there 15 years ago: http://frobenius.com/bletchley/bl012.jpg If I could see only a couple of things: Hut 8 where Turing used to do his thing and, of course, the Colossus rebuild. It is easy to spend two days there, which I did 2004. Best, Jack Harper Evergreen, Colorado USA At 03:54 AM 7/6/2019, Bill Degnan via cctech wrote: >Hi...I am arriving at Gatwick Airport this weds evening1045pm and I have a >17 hour layover. I'd like to visit the national computer museum at >bletchley park about an hour north. I see I can rent a car from the >airport and drive to a hotel near the museum. There are a few hotels with >24/7 desks. Concerns? Total time in England is 17 hours, 8 of which >needed for sleep, plus travel to and from the airport and museum. Not sure >how efficient the car rental return process is, etc. Need some buffer for >unknowns >Thanks in advance > >Bill ---------------------------------------------------------------------------------- Jack Harper, President Secure Outcomes Inc 2942 Evergreen Parkway, Suite 300 Evergreen, Colorado 80439 USA 303.670.8375 303.670.3750 (fax) http://www.secureoutcomes.net for Product Info.

6 years, 11 months

Question about Apple ///

by athornton＠gmail.com

I have an Apple /// that I've had for many years; it's never worked. When you power it up, you get a checkerboard screen, where half the squares are solid white, and the other half have a little mosaic pattern in them. Looks like this: https://share.icloud.com/photos/0NHNkEG9ssPsi65ojivBteKaQ Does this failure mode ring any bells? Obviously the video signal is being generated well enough to sync a composite output. Any idea whether I should start by replacing the CPU or the ROMs? Adam

6 years, 11 months

cctalk Digest, Vol 58, Issue 6

by nw.johnson＠ieee.org

Anybody have any docs on the DEC LSI 11/93 (KDJ11-E)? I have a suspect one and am looking for schematics, configuration data etc. I am trying to run it in a BA23 backplane and seemingly geting bus hangs as is there is something that it is looking for that is not there! cheers, Nigel On 06/07/2019 13:00, cctalk-request at classiccmp.org wrote: > Send cctalk mailing list submissions to > cctalk at classiccmp.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.classiccmp.org/mailman/listinfo/cctalk > or, via email, send a message with subject or body 'help' to > cctalk-request at classiccmp.org > > You can reach the person managing the list at > cctalk-owner at classiccmp.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of cctalk digest..." > > > Today's Topics: > > 1. Re: gunkies.org is down or?... (Noel Chiappa) > 2. Re: gunkies.org is down or?... (ben) > 3. Email delivery protocols / methods. (Grant Taylor) > 4. Re: Email delivery protocols / methods. (Dennis Boone) > 5. Re: Email delivery protocols / methods. (Diane Bruce) > 6. Re: Email delivery protocols / methods. (Diane Bruce) > 7. Question about Apple /// (Adam Thornton) > 8. Lots of Apple 1 computers @ VCF West (Evan Koblentz) > 9. Re: Question about Apple /// (Jecel Assumpcao Jr.) > 10. Re: Email delivery protocols / methods. (Dennis Boone) > 11. RE: Email delivery protocols / methods. > (newsgroups at micromuseum.co.uk) > 12. RE: Email delivery protocols / methods. (Dave Wade) > 13. Re: Email delivery protocols / methods. (Bill Gunshannon) > 14. Re: Lots of Apple 1 computers @ VCF West (John Herron) > 15. Re: Email delivery protocols / methods. (Peter Coghlan) > 16. Re: Email delivery protocols / methods. (Peter Corlett) > 17. Re: Email delivery protocols / methods. (Jason T) > 18. Re: Lots of Apple 1 computers @ VCF West (ED SHARPE) > 19. Re: Lots of Apple 1 computers @ VCF West (ED SHARPE) > 20. Re: Lots of Apple 1 computers @ VCF West (Evan Koblentz) > 21. Re: Question about Apple /// (Jim Manley) > 22. Re: Lots of Apple 1 computers @ VCF West (Evan Koblentz) > 23. Re: Question about Apple /// (ED SHARPE) > 24. Re: Lots of Apple 1 computers @ VCF West (Evan Koblentz) > 25. Re: Lots of Apple 1 computers @ VCF West (Guy Dunphy) > 26. Re: Question about Apple /// (Bill Degnan) > 27. Re: Email delivery protocols / methods. (Noel Chiappa) > 28. Re: Wtd: advice upcoming visit to Bletchley Park / comp > museum (Mattis Lind) > 29. Re: Question about Apple /// (ED SHARPE) > 30. Re: Wtd: advice upcoming visit to Bletchley Park / comp > museum (Peter Corlett) > 31. Wtd: advice upcoming visit to Bletchley Park / comp museum > (Bill Degnan) > 32. Re: Email delivery protocols / methods. (David Bridgham) > 33. Re: Email delivery protocols / methods. (David Bridgham) > 34. QSIC, was: Re: Email delivery protocols / methods. > (emanuel stiebler) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 5 Jul 2019 13:33:38 -0400 (EDT) > From: jnc at mercury.lcs.mit.edu (Noel Chiappa) > To: cctalk at classiccmp.org > Cc: jnc at mercury.lcs.mit.edu > Subject: Re: gunkies.org is down or?... > Message-ID: <20190705173338.C9ACB18C0B6 at mercury.lcs.mit.edu> > > > From: Tomasz Rola > > > Is it really down? > > I suppose this is actually good news, in a way - someone must have been > trying to use it, to notice that it was down! :-) > > So let me take this opportunity to appeal once again for people to contribute > content; I've added a lot of PDP-11 stuff, and Lars and I sporadically add > PDP-10 stuff (not that very many actually have a hardware -10 :-), but > _everything else_ could use more content. So if you have a particular focus - > please consider contributing your knowledge in that area! > > Noel > > > ------------------------------ > > Message: 2 > Date: Fri, 5 Jul 2019 11:46:30 -0600 > From: ben <bfranchuk at jetnet.ab.ca> > To: cctalk at classiccmp.org > Subject: Re: gunkies.org is down or?... > Message-ID: <fef4a9ac-4bee-acee-5bdd-e7fbfbdc5647 at jetnet.ab.ca> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 7/5/2019 11:33 AM, Noel Chiappa via cctalk wrote: >> > From: Tomasz Rola >> >> > Is it really down? >> >> I suppose this is actually good news, in a way - someone must have been >> trying to use it, to notice that it was down! :-) >> >> So let me take this opportunity to appeal once again for people to contribute >> content; I've added a lot of PDP-11 stuff, and Lars and I sporadically add >> PDP-10 stuff (not that very many actually have a hardware -10 :-), but >> _everything else_ could use more content. So if you have a particular focus - >> please consider contributing your knowledge in that area! >> >> Noel > It looks up from here. Wow all those banks of EVIL computers behind that > man in the photo. Ben. > > > > ------------------------------ > > Message: 3 > Date: Fri, 5 Jul 2019 15:05:32 -0600 > From: Grant Taylor <cctalk at gtaylor.tnetconsulting.net> > To: cctalk <cctalk at classiccmp.org> > Subject: Email delivery protocols / methods. > Message-ID: > <ff892b2d-b7f1-01e8-a59c-f60f890f4f77 at spamtrap.tnetconsulting.net> > Content-Type: text/plain; charset=utf-8; format=flowed > > Here's pot stirrer for a holiday Friday afternoon: > > How many different protocols / methods can we collectively come up with > for how email can be transferred? > > I'm primarily thinking about between servers (MTA-to-MTA). But I'm also > willing to accept servers and clients (MTA-to-MUA). Where you can / > could run at least one server yourself. > > ? SMTP(S) > ? UUCP (rmail) > ? MMDF > ? X.400 > ? Microsoft Exchange proprietary protocol > ? Novell GroupWise proprietary protocol > ? Lotus (IBM) Domino proprietary protocol > ? FidoNet (FTN) > ? BITNET > ? Direct file access - group Post Office > ? Direct file access - mail spool > > > -- Nigel Johnson MSc., MIEEE VE3ID/G4AJQ/VA3MCU Amateur Radio, the origin of the open-source concept! You can reach me by voice on Skype: TILBURY2591 If time travel ever will be possible, it already is. Ask me again yesterday This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way. Nigel Johnson <nw.johnson at ieee.org> Please consider the environment when deciding if you really need to print this message

6 years, 11 months

Email delivery protocols / methods.

by jnc＠mercury.lcs.mit.edu

> From: Grant Taylor > How many different protocols / methods can we collectively come up with > for how email can be transferred?' Hey, this is the classic computers list, so you should only list early stuff, (say pre-1990), and leave out all the modern crap (but I repeat myself). So here's one I'm not sure anyone else will catch: TFTP has an email mode! Why? Well, FTP is gargantuan (compared to TFTP) and needs a working TCP to boot, so if all you have is a working TFTP, and no email... Noel

6 years, 11 months

gunkies.org is down or?...

by jnc＠mercury.lcs.mit.edu

> From: Tomasz Rola > Is it really down? I suppose this is actually good news, in a way - someone must have been trying to use it, to notice that it was down! :-) So let me take this opportunity to appeal once again for people to contribute content; I've added a lot of PDP-11 stuff, and Lars and I sporadically add PDP-10 stuff (not that very many actually have a hardware -10 :-), but _everything else_ could use more content. So if you have a particular focus - please consider contributing your knowledge in that area! Noel

6 years, 11 months

gunkies.org is down or?...

by jnc＠mercury.lcs.mit.edu

> From: Diane Bruce > Works fine. Probably a left-over cached entry; neither my ISP's DNS, nor MIT's ("Host gunkies.org not found: 3(NXDOMAIN)") can resolve it at the moment. One year Tore was off hiking or something, and it took a few days, but past experience is that he will get to it. (But I'd like to not have to depend on him.) Noel

6 years, 11 months

gunkies.org is down or?...

by jnc＠mercury.lcs.mit.edu

> Tomasz Rola > However, I have added this line to my /etc/hosts: L-rd, I must be getting old - it never dawned on me to do that. Anyway, that shows the server was fine, it was just the missing DNS entry. Back now. Noel

6 years, 11 months

gunkies.org is down or?...

by jnc＠mercury.lcs.mit.edu

> From: Tomasz Rola > Is it really down? Could it come back? Tore forgot to pay the bill for his DNS entry; this is the third year in a row the exact same thing has happened, on the exact same date! :-) :-( I've already sent him an email about it, this morning; hopefully he'll get with the program shortly. If I knew the IP address for gunkies (it used to be 92.242.140.2, not sure if it's still at that hosting service - the hosting and DNS entry are separate) I'd be really tempted to pay it myself - and switch the registration to myself in the process, so I can pay it in the future! Not sure how long a bill has to be unpaid before you can hijack an entry, though. Noel

6 years, 11 months

gunkies.org is down or?...

by rtomek＠ceti.pl

I have just noticed that. => (885 3): host gunkies.org Host gunkies.org not found: 3(NXDOMAIN) Looks like it fell off the edge of the world. Gog still has pages in cache, time of caching for one particular page I am reading is May 30th, 09:38:55 GMT. Is it really down? Could it come back? -- Regards, Tomasz Rola -- ** A C programmer asked whether computer had Buddha's nature. ** ** As the answer, master did "rm -rif" on the programmer's home ** ** directory. And then the C programmer became enlightened... ** ** ** ** Tomasz Rola mailto:tomasz_rola at bigfoot.com **

6 years, 11 months

Classic / NOP machines becoming available in Berlin (inc. DECs, Commodores, Apples, HPs, SGIs and more)

by shadoooo＠gmail.com

Hello Peter, you have a nice list of interesting things. I'm very interested in DEC machines, which I collect and repair for preservation purposes. Among others, I could be interested in those: DECmate assorted QBUS boards (do you have a list?) VAX 4000/90A VAX 4000/96 VAX 4000/100A VAX 4000/105 DEC RFxx disks, TK50 and TU58 tapes if available Commodore dual FFDs 4040 or 3040 Possibly Amiga 1000/1200/2000 for a friend of mine. I would have an idea about prices, however... If you prefer, please contact me privately. I see you here a long list of burnable ISOs. I already have several of those, but it would be very nice to merge with yours... could you share them somewhere over the net? Thanks Andrea

6 years, 11 months

Classic / NOP machines becoming available in Berlin (inc. DECs, Commodores, Apples, HPs, SGIs and more)

by prd＠decarchive.org

Dear all, Apologies for this semi-spam message from a long-time appreciator of classic computers and nostalgic obsolete products, but I hope this will be of interest to at least a few people here. So, yes, by way of context, I?ve been acquiring what I consider to be characterful and/or historically interesting computers for coming up to, maybe, 15 years now, with the intention of being able to curate multiple, interactive temporary exhibits on the history of computing, but since moving continents (amongst other things), my paths and passions have changed, so I am currently in the process of re-testing (and repairing) my machines, and will be trying to sell them off in the coming weeks and months. Under different circumstances, finding people (or groups) with similar interests and plans would have been an equal-first priority, but given my more recent ?life changes', sale price ? and the ability to better pursue my new focuses ? is now more of a factor. But before I list them on eBay (and/or by way of a heads up), I wanted to let people here know, just in case I have something that someone here particularly wants / needs / could use. The current list of systems I will be parting with is accessible at https://docs.google.com/spreadsheets/d/1QqUrO11gnn4fwAPDxqO_phKDt1M0O15G7wJ… but some (hopefully) highlights include (*big breath*): DEC: MicroPDP-11/53+; MicroVAX 2000; VAXstation 4000 VLC/60/90A/96; VAX 4000 100A, 105; DECstation 5000/240, 260 (MIPS-based); DEC 3000/300X; Personal Workstation 600au; AlphaServer 4100; AlphaServer DS20, DS25 systems; Letterwriter 100; VT 101, 220, 520 terminals HP: HP rx2800 Integrity2; 9000 715/100 and Visualize C110 PA-RISC systems SGI: Indy and O2 systems SUN: ELC, SPARCstation Voyager (the portable one), 5 and 20; Ultra 1; Ultra 5; Netra T1-105; Enterprise T5240 Apple: IIc, IIe Platinums, IIgs; Mac 512ke, Mac Pluses; SE/30 and Quadra 700s (also for running A/UX); iMac G3s and a G4 Commodore: PET 3000 systems, PET 8032-SK; various C64 / C64C and 128D systems; SX-64; Music Maker keyboards (the big one, inc. SFX modules); Amiga 1000 Apologies again, please feel free to contact me with any queries or reasonable offers, or even if you?d just like to be kept in the loop as more machines become available, and all the best. Thanks in advance, Peter

6 years, 11 months

Recovering the ROM of an IBM 5100 using OCR (among other things)

by jnc＠mercury.lcs.mit.edu

> From: Liam Proven > This is *epic*. Indeed. I was blown away by the complexity of his technique for reading the digits. I can't believe there wasn't a much easier technique, though, e.g. using a logic analyzer and a small program to read through the ROS! Perhaps the challenge of doing it his way entertained him, though, like George Mallory's famous line about climbing Everest. Noel

6 years, 11 months

NASA Ames (Moffet Field) Computation Division?

by cclist＠sydex.com

Anyone know what hardware was at NASA Ames in the late 70s? I've got some tapes from there and would like to avoid guessing. --Chuck

6 years, 11 months

Need Fileware twiggy diskette picture for Wikipedia

by dave＠661.org

Someone informed me that the Fileware diskette image I uploaded to Wikipedia has unclear copyright status. See https://en.wikipedia.org/wiki/File:Fileware-floppy.jpg. Would someone with a good specimen please scan it and upload to Wikipedia or send it to me? -- David Griffith dave at 661.org A: Because it fouls the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?

6 years, 11 months

Latest Additions to the Virtual Warehouse of Computing Wonders Sale Inventory

by sellam.ismail＠gmail.com

Greetings Folks! I have finalized the latest batch of items added to the inventory of my Virtual Warehouse of Computing Wonders, and here it is: Commodore 64 Exatron MM800 Internal Memory IBM PCjr Power Expansion Attachment IBM 74F3465 The 3270 Connection Polaroid PerfectData DS/DD 8" floppy disk (10-pack) Xidex Precision DSDD 8" Floppy Disks (10-pack) Diablo Printwheel - APL 10 Diablo Printwheel - Courier 10 Diablo Printwheel - European Elite 12 Diablo Printwheel - OCR A Diablo Printwheel - Pica 10 Diablo Print Ribbon (Carton of 12) SmartPrint Printer Sharing Network Add-on Computer Module Symantec Think C for Macintosh 6.0 (Upgrade) Hayes Personal Modem 1200 Gravis Mac MouseStick II Apple Power Mac Processor Upgrade (APMPU) Orange Micro OrangePC MS-DOS Coprocessor Radius Full Page Display SE Corvus Systems Macintosh OmniDrive User Guide Corvus Systems Qbus Interface RT-11 System Reference Card RT-11 System Reference Card Convergent Technologies WK-100 WorkSlate Convergent Technologies WorkSlate Travel Task Ware Radio Shack TRS-80 Model 100 Portable Computer Radio Shack TRS-80 Model 100 Cassette Interface Cable TRS-80 Model 100 Calculator TRS-80 Model 100 Bar Code Drivers TRS-80 Model 100 Bar Code Writer TRS-80 Model 100 Executive Calendar TRS-80 Model 100 Function Plotter TRS-80 Model 100 Personal Finance TRS-80 Model 100 Portable Computing with the Model 100 TRS-80 Model 100 SCRIPSIT 100 TRS-80 Model 100 StarBlaze 100 TRS-80 Model 100 Tandy Code Tandy 102 Owner's Manual/Applications and BASIC Reference Guide IBM Personal Computer PCjr BASIC Reference IBM Personal Computer PCjr Guide to Operations Hands-On BASIC for the IBM PCjr AST VGA Plus Tall Tree Systems AT3-P w/JLaser-3 daughterboard Western Digital WD7000-ASC FASST2 SCSI Controller Ziatech IEEE 488 Interface for PS/2 Computers Everex 24E+ External Modem Epson FX-86e/286e Printer User's Manual Citizen Color Ribbon Okidata Okimate 20 Plug 'N Print for IBM PC and Compatibles Okidata Tractor Feed Option Kit (boxed) Memorex Epson MX-80 Printer Ribbon 3M DS,HD 5.25" Diskettes (10-pack) Dysan 100 MD2HD floppy diskette 10-pack Ohio Scientific 5.25" Mini Floppy Diskette (10-pack) Verbatim Datalife SS/DD 5.25" Minidisks (7-pack) Epson E95D0U External 5.25" Disk Drive Compaq MS-DOS Version 3 Reference Guide DEC PDP-8/L Instruction List reference card Osborne dBase II Version 2.3b (manual only) Altera MAX+plus II Programmable Logic Development System FHR Industries 1200 Intelligent Modem Commodore 64 HP 92220R HPIB Right Angle Cable (1ft) HP10833B HPIB Cable (2m) SunRize Industries Perfect Sound Timex-Sinclair 1000 Sinclair ZX81 case Apple Macintosh Plus (Platinum) Apple Macintosh SE w/Targus Carrying Case (Those are two different Commodore 64 units, one has a case "variation".) Links to the newly arrived items are here: https://docs.google.com/spreadsheets/d/1I53wxarLHlNmlPVf_HJ5oMKuab4zrApI_hi… I have discovered the myriad of Facebook vintage computing groups, so I have begun posting my sale lists there as well. However, I will always post notifications of new lists here and on the VCFed forums 24 hours before I unleash them on the FB groups, which results in a deluge of activity. In this way, I give you guys first stab at the action on the new stuff before the hordes descend upon it. You are welcome. As always, please contact me directly by e-mail to inquire about an item. Thanks! Sellam

6 years, 11 months

Latest Additions to the Virtual Warehouse of Computing Wonders Sale Inventory

by commodorejohn＠gmail.com

I'll also vouch for Sellam. His prices are a bit higher than I might prefer, but he's a straight dealer as far as I've ever seen; I bought an Apple IIc from him and he gave me no trouble at all about exchanging it when the board turned out to be cracked.

6 years, 11 months

IBM PS/2 Model 70 or compatible floppy drive wanted (Or help with current one?)

by mokuba＠gmail.com

Hey all, i'm having a fair amount of trouble with my PS/2's floppy drive... wanted to back up my BBS and none of the disks i put in would read or format! Oddly though, it WILL boot a disk that's inserted on power-on. I hear it try and hit the disk a few times while in dos repeatedly before failing with the R/A/F options ... and format tries to read it, then goes attempts to format it, and can't find sector 0 ..... I'm really confused about those symptoms since it boots the only bootable disk I had on hand - ironically spinrite 6 (I'm aware of how useful it is...) - so i'm looking at replacing it ... or figuring out what's wrong with it that it can boot a disk just fine, but not use one while in DOS ? .... and by wiggling the floppy a bit I just got it to format a disk while in the ... drive, and now it's making the noise it did before and stalling occasionally. Perhaps the disk just isn't catching fully? -- Gary G. Sparkes Jr. KB3HAG

6 years, 11 months

Latest Additions to the Virtual Warehouse of Computing, > Wonders Sale Inventory

by marvin＠west.net

FYI, it is unlikely there would have been a VCF without Sellam. He basically started it (with his own money) and continued through the first 10 years or so. Many others help support VCF (and continue to do so even though Sellam backed out some number of years ago.) I, for one, fully support Sellam in his effots to move out his inventory, and have never seen him sell anything at 10x prices. Marvin > From: Randy Dawson <rdawson16 at hotmail.com> > > Anybody try business with this guy? > His prices are 10X off the chart

6 years, 11 months

DNS and Registrar

by cctalk＠gtaylor.tnetconsulting.net

On 6/27/19 12:53 PM, jim stephens wrote: > They don't have to be combined. Agreed. I've been running DNS servers for about 20 years. I /always/ prefer to run my own DNS servers if I can. I have never run across a situation where I was unable to do so for /technical/ reasons. I have had clients that /chose/ to /not/ host their own DNS for a /business/ reason. > I have a friend running his and my DNS on a server at his house with two > DSL feeds for good measure, one is primary DNS for our domains, second > one is published as the secondary. *nod* I'd worry about DSL circuits and stability for DNS. But it will probably work > 98% of the time. If you're comfortable with it, more power to you. I would likely do something more like I'm doing now, run the master name server (MNAME field in the SOA record) on the DSL and have somebody else with a more robust connection (DSL had issues where I'm from) do a slave zone transfer and be the listed Name Servers (NS records) that the world talks to. I actually do that now with my VPS being the MNAME server and my VPS provider doing slave zone transfers off of me. Note how the registrar is not part of that mix. ;-) > The biggest thing to watch for is the lax rules for transfering > domains.? There was a problem with that, but most registrars allow locks > now that impede the movement of domains w/o a bit of work. That sounds like you're talking about moving domains between registrars, which is decidedly different than and independent of where DNS is hosted. Admittedly the registrar has to point (delegate) to the DNS hosting provider. But it's fairly easy to move domains between registrars without even logging into a portal at the DNS host. > Used to take a couple of emails to highjack a domain, as there wasn't > even a notification to verify that the transfer process email was > requested by the owner. Ya. Registrars have had some deficiencies over the years. I think they are getting better. > You are strongly encouraged to use a third party "professional" DNS > service, but it only really need to be up reliably. ~whistling~ ? ~quiet~ ? I'm sorry, did you say something? No. Never mind. I'll go back to what I was doing. ? ~whistling~ I mean that as a joke. I let a LOT of what companies that are trying to sell to me go in one ear, sanity check it, and then go out the other ear. I'm of the opinion that a static IP is the biggest requirement for /most/ DNS service. I.e. somewhere to have the registrar delegate the DNS to. Beyond that, I'm happy to delegate sub-domains to people on dynamic IPs if they want them. It's possible to put DNS a LOT of places that don't qualify as "Best Practice". Most of them will work most of the time. > We have the dual providers for the node my friend runs, as we know from > the phone companies and providers that though the DNS is over the same > 12 pair wire into his house (another trick), the CO actually has the > DNS switches on different racks and UPS's. Which isn't a bad precaution. That's probably okay for most things. But it's still subject to Backhoe Bob and the fade that he can induce. That's why I have my master that I can do anything and everything I want to, and outsource to slave secondaries. Linode, my VPS provider, has five different DNS servers that (I belie) are geographically diverse. It will be quite a bit harder to take out all five of their DNS servers. Plus, I don't have to pay for connectivity in five different locations. ;-) I'm curious, you said DSL. But that could be anything from 1.5 Mbps ADSL to SDSL to VDSL. Each of which have different capabilities and SLAs. Other than the backhoe fade taking out both connections at the same time, higher quality DSL with SLAs is probably okay to do. I think the official recommendation for big (think root level) DNS servers is to have each server in a different network, where network is defined as /24 (or larger), preferably under different ASNs. But that's not a /requirement/, especially for smaller DNS operators. > thanks You're welcome. -- Grant. . . . unix || die

6 years, 11 months

Anyone have an Ethernet interface card for an AT&T 730 terminal?

by aek＠bitsavers.org

I just finished taking pictures and dumping the firmware from a 730X terminal but it turns out it has a Starlan and not an Ethernet interface. It would be nice to get a firmware dump from an Ethernet card. A start of a 630 driver is in MAME. http://bitsavers.org/pdf/att/730/730X It also appears the keyboards for the 630 and 730 aren't backwards compatible with the other 6xx products and the 5620. 5620 keyboards need -12v which the 630 or 730 don't supply, and the 610 keyboard doesn't appear to work either. Josh took a couple of pictures of his 630 keyboard and even though they look similar, the earlier keyboards were made by Teletype and the 630 is made by Keytronic.

6 years, 11 months

Identifying some boards

by kylevowen＠gmail.com

I picked up these boards many weeks ago, but haven't photographed them until recently. Some of them are pretty disgusting, but some of the others look alright. Anyone have any idea what these came out of? Some are labeled Gould, others are labeled Encore. http://imgur.com/a/d9iK9qb Thanks! Kyle

6 years, 11 months

OT: the end of Dyn DNS

by chd＠chdickman.com

Now that Dyn has been absorbed by Oracle I need a new DNS service for my vanity domain. I welcome suggestions for a replacement provider. -chuck

6 years, 11 months

Recovering the ROM of an IBM 5100 using OCR (among other things)

by boris＠summitclinic.com

That was a very interesting read! The type of thing I could see myself doing over 40 years ago when once I'd come up with a neat idea and either did preliminary coding or hardware design suggesting it would work I'd jump right into it and find optimistic 1 month project timelines stretching to 6+ months. My approach now would be to just use a logic analyzer or a number of Propeller boards to sample all of the lines from ROS as very sedate clock speed that the 5100 uses. Still, this has applications beyond original goal and could use it to acquire patient lab data from hospital EMR's which are increasingly locked down. Used to be I could export a patients lab results to a text file easily to graph them out vs time or look at correlations between various lab values. Now that's forbidden as one is only allowed to look at them on the screen or use the abysmal graphing functionality which is very poorly coded and makes a PDP-8 doing the same functionality seem like a supercomputer. Thus, one could simply point a cell phone camera at the screen, record the lab results scrolling by and then do OCR on the series of images to create a data file of all of the lab results one is interested in. I've just photographed results on a screen as takes less room than another sheet of paper. >This is *epic*. > >https://github.com/stepleton/5100NonExecutableROSDecode/blob/master/WRITEUP… > >-- >Liam Proven - Profile: https://about.me/liamproven >Email: lproven at cix.co.uk - Google Mail/Hangouts/Plus: lproven at gmail.com >Twitter/Facebook/Flickr: lproven - Skype/LinkedIn: liamproven >UK: +44 7939-087884 - ??R (+ WhatsApp/Telegram/Signal): +420 702 829 053

6 years, 11 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb