test-drb

test-drb@ccmp.vtda.org

101090 discussions

by andy＠smokebelch.org

Hello, A little while ago I bought a "new" 10ft MMJ cable from That Website. Today I came to use it and discovered it was a crossover cable. So, my question is where can I buy a straight MMJ - MMJ? 10ft would be fine, longer perhaps better, and ideally a UK source. Whilst on the subject of DEC, I'm also looking for an ethernet card for a PDP 11/53 and perhaps a TK drive (assuming that if on power-up the drive wheel just spins continually and you can't lift the handle, the drive is broken). Cheers, Andrew ---------------- Andrew Back a at smokebelch.org

17 years, 5 months

IBM 5110

by chrism3667＠yahoo.com

is it likely I'd be able to read disks from this system on one of the following (all equipped w/8" floppy drives): IBM System 23/Datamaster Canon AS-100 NEC APC

17 years, 5 months

Looking for a 1/3 height Apple II type diskdrive

by jos.mar＠bluewin.ch

Subject says it all : I need to replace the floppy drive in my Lilith. The floppy PCB is so crappy that further repairs are pointless, PCB traces fall off whenever a soldering iron comes with smelling distance. Willing to pay reasonable amount, location Switzerland Jos.

17 years, 5 months

9 DEC H-500 Trainers on Epay

by innfoclassics＠gmail.com

Spotted on ebay... DEC H-500 computer logic trainers. I thiink it is a reasonable price and there is the chance to make an offer. Front panels look PDP-8 vintage. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200279483013 No connection with the seller, just spotted what I hope is an interesting item. Pax -- Paxton Hoag Astoria, OR USA

17 years, 5 months

WangEmu 2.1 released

by frustum＠pacbell.net

A new version of my Wang 2200 emulator, version 2.1, was just released after a three year snooze: http://www.wang2200.org/emu.html This version runs on Win XP/Vista, PPC OS X, or i386 OS X. Full source code is included. The big changes are support for large format disk geometries due to emulation of the intelligent disk controller protocol, 2200B mode, the ability to print directly to the parallel port, and a massive code clean up. Release notes: http://www.wang2200.org/emu/relnotes_2.1.txt

17 years, 5 months

68k homebuilts

by lynchaj＠yahoo.com

Hi everyone As a 4th year computer engineering student with a part time job, I definitely have too much time on my hands, so I've been thinking about doing something like building my own computer. I remember playing with the 68k SBCs back in my assembly class, so I thought something from that family might be an interesting choice. It's ambitious, but ideally I'd like to do 16/32 bits and a few megs of memory. Have any of you built something like this? I'm looking for links to project pages, shared experiences, and advice on what processor to use. Reminiscence is welcome too, if you have fond memories of such a thing :) Thanks John Floren -- Ph'nglui mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn -----REPLY----- Hi! If you are interested in home brew computing you are welcome to join us on the N8VEM home brew computer project. It is currently Z80 CP/M based but if you would like to explore 6800/6809/68k designs you could design your own SBC and reuse the peripheral board designs we have already. There is an SBC, an ECB backplane, an ECB bus monitor, and an ECB prototyping board available now. There have been 68k based ECB designs in the past although I am not an expert in how those work. As long as it uses +5, GND, Address, Data, and a variety of control bus signals it should work though. A Disk IO board (IDE and NEC765A FDC) and a Terminal Replacement Board (uses VGA monitor & PS/2 keyboard) are in the works. Several builders have projects as well such as a USB & network peripheral (!) which allows running CP/NET. There is another builder with a project that allows wireless serial communications and numerous interfaces to relays, etc. That same builder made an AT keyboard interface and a 20x4 LCD display with NVRAM controller. In short, you could focus on your 68k SBC design while leveraging the peripherals and standard bus components already available. Take it for what it's worth. You can contact me offline if you'd like more information. There are photos, schematics, PCB layouts, ROM images, parts lists, BOMs, and bunch of other stuff on the website. The PCBs are all $20 each. Good luck with your project! Thanks and have a nice day! Andrew Lynch http://groups.google.com/group/n8vem http://n8vem-sbc.pbwiki.com/

17 years, 5 months

ACCRC Sealed Bid Auction for Vintage Computers

by sellam＠vintagetech.com

The Alameda County Computer Resource Center (ACCRC) is forced to liquidate its computer museum due to the current economic climate. The VCF has been contracted to auction off the ACCRC museum to raise needed funds for their non-profit operation. I have put up the first batch of machines at the following URL: http://www.vintage.org/special/2008/accrc/ In order to use the system you must have a VCF Community ID. Getting one is simple: just following the links and prompts when you visit the site above and read the instructions. I have been cataloging the hundreds of items in the ACCRC museum and will be putting up auction lots weekly until the collection is dissipated. There are still many items to go (with lots of duplicates) so check back every week to see the latest batch. All items are offered as-is. Functional condition is unknown unless specified in the item description. For more information about a particular item, please contact the VCF and your inquiry will be answered as soon as possible. Winning bidders will be notified at the close of the auction (see below for closing time). In the event of a tie bid, the winning bid will be the one submitted the earliest. Upon receiving a winning bid notification, payment and pick-up at the ACCRC facilities in Berkeley, California, is preferred. Payment from winning bidders is due within 72 hours after the close of the auction. Non-payment will invalidate your high bid and the item will automatically go to the next highest bidder (no exceptions). Upon request, items will be packaged and shipped at bidder's expense plus a $25 handling fee. Payment in the form of cash, money order, or PayPal (in that order) is preferred. Personal checks will be accepted on the condition that they first clear the bank. All items must be sold. No reasonable offer will be refused. Your purchases will go towards supporting an organization that over the years has provided nearly 20,000 refurbished computers to needy organizations and individuals worldwide. 100% of the proceeds of this auction will go directly to the ACCRC (minus the handling fees, which are covering my time...barely). Please contact me DIRECTLY with any questions you might have of any of the items. I'll be happy to get more notes and photos on particulars items of interest from inquiring bidders. http://www.vintage.org/special/2008/accrc/ -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

17 years, 5 months

USB Model M

by dm561＠torfree.net

Date: Fri, 12 Dec 2008 10:51:25 +0100 (CET) From: Christian Corti <cc at informatik.uni-stuttgart.de> Subject: RE: USB Model M I think this is not the classic IBM keyboard we're talking about. *The* classic keyboard has the part number 139140x where x differs from country to country. This is what's on the label of my keyboard (a rather new one, the oldest one I have dates from 1987 and came along with my 8550-021). There's no IBM logo on the bottom, only the oval grey logo on the top left. 1391403 55-0749972L 1386716 EC 528557 EC 528693 1992-06-23 MANUFACTURED IN UNITED KINGDOM (C) IBM CORPORATION 1985 PRINT BUILD TEST INSP 14A 60A (sig.) (sig.) Christian PS: The US version of the keyboard is the model 1391401. -------------Reply: Probably no point in arguing with someone who, because his particular keyboard does not say "Model M," therefore insists that "IBM *never* called the (Model M) keyboard a Model M." Presumably even if I sent him a picture of one of my 1391401s plainly labelled "Model M" he would not be convinced any more than he is by others on here and the extensive Wiki entry. Oh well...

17 years, 5 months

More terminals and microcomputers to go in West Sussex, UK

by paul＠frixxon.co.uk

Here's another batch of things that I don't have time to play with. Same deal as before -- tell me you can come and collect them from Crawley, the sooner the better. Most of these are easily obtainable, so they will go to landfill if they aren't claimed. Sharp MZ-700 2 x Amstrad CPC 464, one boxed and clean, the other with the inevitable cracked cassette cover DEC Letterwriter 100 DECserver 200/MC (DSRVB-A) 2 x Commodore Amiga 500 Acorn Electron and games TI Silent 700 (the enormous briefcase one with acoustic coupler) 2 x DEC TK50Z drives 2 x Commodore 64 Motorola EXORterm 155 -- no keyboard with this. AVID video editing unit and the BBC micro that it was used with I've put photos of some of these on Flickr: http://www.flickr.com/photos/frixxon/ Paul.

17 years, 5 months

HP Omnibook 600C startup disk?

by IanK＠vulcan.com

I picked up a nice little HP Omnibook 600C from someone here on the list, and after a few minutes of playing with it the hard drive decided it did not like its new home. Hey, no worries, stuff happens. It's a PCMCIA hard drive, so I plugged a CF card into a PCMCIA adapter and voila!, I have a new C: drive. But unfortunately, when the disk did its swan dive it took with it all the custom drivers and such that HP loads on it. That may explain why I can't get apparently simple things to work. So, does anyone have one of these machines or its startup disk, and are you willing to share? Thanks -- Ian

17 years, 5 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb