Has My VAXmate Flyback Transformer Failed?

Rob Jarratt robert.jarratt at ntlworld.com
Wed May 13 03:03:17 CDT 2020



> -----Original Message-----
> From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Holm Tiffe via
> cctalk
> Sent: 13 May 2020 08:19
> To: Rob Jarratt via cctalk <cctalk at classiccmp.org>
> Subject: Re: Has My VAXmate Flyback Transformer Failed?
> 
> Rob Jarratt via cctalk wrote:
> 
> > I have been looking at the flyback transformer from my VAXmate. I
> > think it could have failed but I can't be completely sure. I have
> > posted a description here:
> > https://robs-old-computers.com/2020/05/12/vaxmate-flyback-transformer/
> >
> >
> >
> > Can anyone offer an opinion?
> >
> >
> >
> > Thanks
> >
> >
> >
> > Rob
> 
> Hi Rob,
> 
> I think that the FBT is bad and it is the cause for overloding that diode
in the
> PSU.
> This is an usual scenario for old Monitor Hardware, nothing new.
> The Epoxy in the FBT gets hard and brittle over the time and therefore it
cracks
> internally..causing winding shorts or opens.
> Look if you can get an replacement FBT somwehre on the surplus market.
> Please post all the numbers on the FBT-Label..if any exists.
> 

I have already tried that but I will try again. For information the label
says:

15-27188-01
TAI-HO TH-1802B

Thanks

Rob

> Regards,
> 
> Holm
> 
> --
>       Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
>      Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
info at tsht.de
> Fax +49 3731 74200 Tel +49 3731 74222 Mobil: 0172 8790 741



More information about the cctech mailing list