uc04 + scsi2sd ?

Josh Dersch derschjo at gmail.com
Sat Jan 5 22:41:21 CST 2019


On 1/5/2019 7:55 PM, Al Kossow via cctalk wrote:
>
> On 1/5/19 2:46 PM, Jacob Ritorto via cctalk wrote:
>> Hey all,
>>    Anyone know whether the Emulex UC04 works with the sd2scsi?
> Nope. This card expects pre common command set disks with non-embedded
> scsi adapters.
>
> In a bad old days, you had to configure the scsi drive adapters
> with disk geometry before you could use them, and the UC04
> does that for adapters like the Adaptec 4000.
>
Al's right; I'll add two things:

1) I've used a SCSI2SD in other systems that formerly used an Adaptec 
4000/5000 controller with some success, but I was only ever able to get 
a single drive to work at a time; you may have similar luck with the 
SCSI2SD if you configure it just right.

2) The SCSI2SD does currently have support for emulating some of these 
early controllers/bridges, but the Adaptecs aren't on the list yet -- 
however the SCSI2SD's creator has been open to feature requests in the 
past, and might be able to add support, and documentation for the 
Adaptect boards is readily available.  (And the SCSI2SD firmware's open 
as well, so you can hack it in yourself if you have the time, etc.)

- Josh



More information about the cctech mailing list