Thicknet/10base5 Test Segment: The Cable is In!

Pete Turnbull pete at dunnington.plus.com
Fri Jun 29 12:17:47 CDT 2018


On 29/06/2018 14:31, Paul Koning via cctalk wrote:

> Yes, and the specified distance limit for RS232 is quite short, 50
> feet or so.
> 
> People have used RS232 over longer distances, of course, and gotten
> away with it.

The RS-232-C standard doesn't actually specify a maximum distance. 
Section 3.1  *recommends* short cables up to 50 feet or 15 meters (with 
speeds up to 20kbps) for RS-232 (and the later-dated Foreword suggests 
RS-449 beyond that) but says that longer is fine so long as the load 
capacitance excluding source and cable is less than 2500pF.  In 
practice, much depends on the baud rate and cable quality used.

-- 
Pete
Pete Turnbull


More information about the cctech mailing list