[RESOLVED] Re: EPROM baking
als at thangorodrim.ch
Tue Feb 6 11:56:58 CST 2018
On Mon, Feb 05, 2018 at 11:06:29AM -0800, Chuck Guzis via cctalk wrote:
> On 02/05/2018 10:20 AM, Mark G Thomas via cctalk wrote:
> > 2) Many of the chips were failing to program because my Batronix
> > programmer apparently requires more current than my USB port provides.
> > This surprised me because I have been programming chips for years
> > using this programmer on this computer port successfully, and this
> > is the first I have had the problem. Using a Anker powered USB hub solved
> > things. My Batronix programmer even arrived with a cheap powered hub
> > when I ordered it, but I never used it because it was shipped with an
> > incompatible wall wart, but looking at it in the box gave me the idea
> > that this might be the issue.
> You should be aware that many "thin" Far East USB cables will not pass
> the full USB 1.5A current without substantial voltage drop. I recently
Maximum current from a standard USB 2.0 port is 500 mA, USB 3.0 ups that to
900 mA. To really get some power via USB, you have to go all the way to
USB C connectors and PD (power delivery), where you easily get 65 W, at the
expense of quite bit of complexity on both ends of the cable.
Of course there are plenty of USB chargers that are all over the map - and
they usually just abuse USB cabling as power wiring, trying to cram 2 A or
more down it - which might not work if whoever made the cable "saved" a bit
too aggressively on the copper.
> ran into this with a new LG portable DVD drive. It refused to operate,
> even though I'd just taken it out of the box. I replaced the "thin"
> USB cable with several other "thin" ones that I had with the same
> result. Finally, in desperation, I located a "thick" USB cable, plugged
> the drive in, and discovered that it worked just fine.
> Moral: There's a lot of garbage out there.
Is there ever, sadly. Including dangerous garbage - with the power levels
of USB C and PD, bad cables (and chargers) can actually by a serious fire
risk. Fortunately, Benson Leung is on a crusade against this:
"Opportunity is missed by most people because it is dressed in overalls and
looks like work." -- Thomas A. Edison
More information about the cctech