Suggestions why SCSI 80 drive w/ SCSI2 (50) adapter will not spin up ?

hp-fix at xs4all.nl hp-fix at xs4all.nl
Tue Mar 21 06:10:44 CDT 2017


The HP 9000/382 only supports SE scsi and the drive needs to be terminated.

-Rik

Van: Pete Lancashire via cctalk
Verzonden: dinsdag 21 maart 2017 07:17
Aan: General
Onderwerp: Suggestions why SCSI 80 drive w/ SCSI2 (50) adapter will not spin up ?

Host is a HP 9000/382

Copied the orig drive using a linux box, adaptec 2940N and good old dd

Then swapped drives, a unused 9 GB 80 pin with a Chinese 80 to 50
adapter.

Did have to issue a spin up command and then copied the data to this drive
again with dd.

Powered all off, added a motor start jumper to the adapter and put it on the
9000/382. Motor will not start, added a jumper right on the drive, no spin.

so .. any ideas what I'm doing wrong, or just try a different drive ?

-pete



More information about the cctech mailing list