Olivetti M24 Mounting Bushes for Bus Converter

Robert Jarratt robert.jarratt at ntlworld.com
Fri Mar 25 16:25:11 CDT 2016

> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Fred
> Sent: 25 March 2016 19:10
> To: General Discussion: On-Topic and Off-Topic Posts
> <cctalk at classiccmp.org>
> Subject: RE: Olivetti M24 Mounting Bushes for Bus Converter
> > I looked up rivnuts and they certainly look similar. They are
> > definitely not standoffs though. I shall look closer at rivnuts.
> also look at nutserts.
> Riv-nuts are pop-rivets with a threaded center.  Usable through sheet
> and into blind holes (very carefully) Nutserts call for drilling and
threading a
> hole and screwing them in.
> I'm assuming that you are talking about threaded inserts in a plastic

I have posted the pictures here:

The pictures show three things:

1. The square holes that the mountings go into.
2. The top and bottom side of the steel mountings.
3. The top and bottom sides of the nylon (?) mountings.

I find myself to really need the steel mountings to be able to mount the bus
converter, I am hopeful that I can move a couple of existing nylon ones.



More information about the cctech mailing list