Rod Smallwood rodsmallwood52 at btinternet.com
Wed Jun 1 13:39:12 CDT 2016

On 01/06/2016 19:21, Glen Slick wrote:
> On Wed, Jun 1, 2016 at 11:05 AM, Rod Smallwood
> <rodsmallwood52 at btinternet.com> wrote:
>> You could if you were able to get into ODT.  I have yet to discover how you
>> get there.
> Read the manual. See that setup option K is the Halt on Break option
> which has a factory default setting of 0, which ignores console breaks
> from the terminal Break key. If you set that option to 1 it enables
> the processor to halt if the console SLU detects a break condition
> from the Break key on the terminal, which should cause console ODT
> mode to be entered.
> http://www.bitsavers.org/pdf/dec/pdp11/1193/
> EK-KDJ1E-UG-001_KDJ11-E_CPU_Module_Users_Guide_Jan91.pdf
> 3.2 Console ODT Entry Conditions
> 4.2.6 Setup Command
> Setup Mode Command 2 • Select Configuration Parameters
> K - Halt-on-Break
> Table 4-12 Halt-on-Break Parameter Variations
That's probably right. However as my system does not do what the manual 
says it should
  I cant get there to change that.


More information about the cctech mailing list