Fan bearing lubricant was Re: WD-40 (again)

Corey Cohen applecorey at optonline.net
Tue Apr 19 06:14:48 CDT 2016



> On Apr 18, 2016, at 10:11 PM, Eric Korpela <korpela at ssl.berkeley.edu> wrote:
> 
>> On Mon, Apr 18, 2016 at 2:53 PM, Chuck Guzis <cclist at sydex.com> wrote:
>> 
>> I did some research among the antique fan collectors on the web.
>> Here's what's been recommended, in no particular order:
> 
> And if you're looking to preserve an extremely valuable museum piece and
> need the ultimate in non-reactive oil or grease, a perfluorinated polyether
> (PFPE) "oil" or one with PTFE nanoparticles is virtually guaranteed not to
> react with anything you might find a computer.  But it is very pricey.  $25
> a gram for Brayco 815z "oil" and $28 a gram for Braycote 601EF or 602EF
> (with MoS2).  The solvent you need in order to remove them is $0.25 a
> gram.   But a gram of this stuff goes a long way.  I'd go with 602EF for
> fan bearings.
> 
> But it does somewhat reduce the need to worry about what happens if the
> "oil" gets hot or hits rubber or paper or plastic.  It doesn't dry out,
> evaporate, or gum up at normal temperatures, since it's teflon and
> molysufide microbearings in liquid teflon.  I wouldn't buy it to use for a
> personal machine unless it was one of a kind, or someone at the lab was
> throwing out a tube of out-of-date braycote.  (Which hasn't been the case,
> I don't have a personal stash).

I have been waiting this thread out to see what options people are using.  

I like to use a product called SuperLube that I get at the gun store.   It's synthetic and I find it doesn't like to pickup dust like other types of lube.  It works great on an AR-15, marine fish tank light fan bearing, and on disk drive rails.  Basically all extreme environment uses involving carbon, dirt, dust and salt water.    

SuperLube is available in a tube and isn't very expensive like whale sperm, I mean oil.  

Cheers,
Corey

corey cohen
uǝɥoɔ ʎǝɹoɔ


More information about the cctech mailing list