ROM Request: Altos ACS 8000 models with 8000 or 8100 logic board

Jay Jaeger cube1 at charter.net
Sat Jul 11 14:26:55 CDT 2015


In working on my ACS 8000-2, I managed to dump the ROM and started
disassembling it, and almost immediately came up with something strange
(see below).  As a result, it is not surprising the machine is totally
confused.

If anyone has an Altos ACS 8000, models 1 thru 4 or 1S thru 4S, that is,
an Altos 8000 with an 8000 or 8100 circuit board, I would really
appreciate a dump of the ROM, as mine either has a coding error (in
which case there could be more) or a bit pick (in which case there could
be more) or some kind of flat-out bug.

Even a paper listing would be just fine.  I have at least two different
ways I ought to be able to program a 2708 if I need to (and I almost
certainly do).

Below is what I found, right at the start of my ROM.  The oddness is
that the Stack Pointer, which is used to do pop values into BC for the
port and byte count for a series of OTIR commands is initialized by the
code to point at 0x35E.  Data for these commands starts at 036E.  The
iteration count for the overall loop is 0x0A (10 decimal).

Here is the problem:  given where the stack starts, 0x35E, that is used
to pop successive port/bytecount pairs into BC, there is only room for 8
of them before it gets to 0x36E, and the data there is clearly NOT part
of the port/bytecount pairs pattern.

So, it seems that one of the following is true:

- The iteration count has a bit pick and should be 08 instead of 0A
- The starting stack pointer has a bit pick, and should be
  0x35A instead of 0x35E
- There is a coding error (essentially equivalent to the first choice)

There is some evidence to support any of these possible choices, though
right now it seems most likely that the iteration count of 0x0A really
should be 0x08.   If someone has a known good ACS 8000 ROM image, then I
could sort it out more easily.

Anyway, given this, it is no wonder the machine is getting confused.

Thanks in advance.

JRJ

Input file: test.bin
0000 ED5E       im 2			; Set Interrupt Mode 2
;
;	Initialization outputs
;
;	Port 0A 5 bytes (PIO Y2 Channel A)
;	Port 0B 5 bytes (PIO Y2 Channel B)
;	Port 12 5 bytes (PIO Y4 Channel A)
;	port 13 2 bytes (PIO Y4 Channel B)
;	port 0C 3 bytes (Console Baud Rate, Y3 CTC CH0)
; 	port 0E 2 bytes (Printer Baud Rate, JX CTC CH2)
;	port 1D 6 bytes (SIO Channel A - Console - Y7)
;	port 1F 6 bytes (SIO Channel B - Printer - Y7)
;
0002 216E03     ld hl,0x036E		; HL <- 0x36E
0005 315E03     ld sp,0x035E		; SP <-	0x35E
0008 160A       ld d,0x0A		; D <- 0x0A
000A C1         pop bc			; BC <- (SP)
000B EDB3       otir			; Output, as described above
;
;	In "peudo C", the otir instruction would do:
;
;	do {
;	   output(C,*HL++);
;	} until(--B == 0);
;				
000D 15         dec d			; Total iterations, 0x0A (10) times
000E 20FA       jr nz,0x000A
;
;	Done with initializations
;	
0010 FB         ei			; Turn on interrupts
0011 31FF3F     ld sp,0x3FFF		; Real SP initialization
					; for RAM during boot,
					; Bit 10 MUST be a '1'
0014 3E00       ld a,0x00		; A <- 0

...	Left out the rest of the disassembly

0357 FB         ei
0358 ED4D       reti
;
;	Data appears to begin here.
;
035A 04         inc b
035B 08         ex af,af'
035C 1020       djnz 0x037E
035E 0A         ld a,(bc)
035F 05         dec b
0360 0B         dec bc
0361 05         dec b
0362 12         ld (de),a
0363 05         dec b
0364 13         inc de
0365 02         ld (bc),a
0366 0C         inc c
0367 03         inc bc
0368 0E02       ld c,0x02
036A 1D         dec e
036B 061F       ld b,0x1F
036D 06CF       ld b,0xCF
036F 42         ld b,d
0370 5E         ld e,(hl)
0371 37         scf
0372 BF         cp a
0373 CF         rst 0x08
0374 FC6A37     call m,0x376A
0377 FECF       cp 0xCF
0379 F8         ret m
037A 6C         ld l,h
037B 37         scf
037C DF         rst 0x18
037D 0F         rrca
037E 03         inc bc
037F 47         ld b,a
0380 0D         dec c
0381 60         ld h,b
0382 07         rlca
0383 34         inc (hl)
0384 04         inc b
0385 44         ld b,h
0386 03         inc bc
0387 E1         pop hl
0388 05         dec b
0389 EA0444     jp pe,0x4404
038C 03         inc bc
038D E1         pop hl
038E 05         dec b
038F EA3031     jp pe,0x3130


More information about the cctech mailing list