Anyone using RK06/07 drives?

Bill Degnan billdegnan at gmail.com
Fri May 29 11:28:26 CDT 2020


Noel,
I can I hope get the backplane and complete 11/44 that goes with it, plus
the RK06 or RK07 (I forget which).  If you or anyone is really interested I
can try to track this one down.  I have been trying to get through to the
owner, he has not returned my calls, but he's a nice guy and I hope to get
the remains of his DEC stuff asap.  I was not super enthusiastic about
getting a RK06/7 drive for space reasons.  Contact me privately if anyone
is interested.

I also reached out a guy that has a few complete 8i systems, trying to get
those too.

Bill

On Fri, May 29, 2020 at 8:27 AM Noel Chiappa via cctalk <
cctalk at classiccmp.org> wrote:

>     > From: Bill Degnan
> `
>     >> I think I have a spare set of boards for the controller.
>
>     > I might be interested if no one else wants this.
>
> You'll need a backplane too - and that's non-trivial. (I'm in the process
> of
> producing one for a KE11-A.) The RK611 is a 9-slot (although several slots
> are just SPC, and can be ignored).
>
>
> Hence the plaint on my 'PDP-11 Models' page:
>
>   http://ana-3.lcs.mit.edu/~jnc/tech/pdp11/PDP-11_Models.html
>
> "DO NOT just keep the boards, and discard the box, bulkhead panels, cables,
> etc. Everyone does that, as a result of which we are now over-supplied with
> boards - but the cables, boxes etc are now rare (un-obtainium in some cases
> ..) These are all now worth a lot more than the cards are!"
>
>         Noel
>


More information about the cctalk mailing list