DIY Paper Tape Punch - Mechanism diagram?
ard.p850ug1 at gmail.com
Fri May 1 12:32:25 CDT 2020
On Fri, May 1, 2020 at 6:20 PM Hugh Pyle <hpyle at cabezal.com> wrote:
> Tony, maybe your collection can help me answer a puzzle: which side is "top"? By my reading, for 8-level tape,
> - ANSI and other US standards have three data bits / index / then five data bits
> - ECMA has five/index/three... :)
As far as I know the 5-hole side is always the most significant 5
bits, the 3 hole side the least significant 3 bits. In other words the
holes go :
Where S is the sprocket hole and a digit is the bit number (bit 0 is
the least significant bit).
As to which way use the tape, with the tape feeding towards you, the
sprocket hole is normally offset towards the right, that is the bits
would read with the MSB on the left. I am not sure if that is
More information about the cctalk