Key for IBM 9370 - 20

jim stephens jwsmail at jwsss.com
Tue Nov 26 16:16:16 CST 2019


I posted on the discord channel looking for information on measuring the 
keys (ACE cylinder locks) for duplication.

I'm including a quote from a post by Jay on the subject.  I need to get 
the information on measuring the depths of the cuts, as the postings 
I've found don't mention how the depths are measured for each value.

I have an ACE key for an IBM 9370 mod 20 I'm measuring. Found a post by 
Jay from 2016
Jay West jwest at classiccmp.org Fri Mar 18 15:57:30 CDT 2016
------------------------------------------------------------------------
FYI - the key codes I measured previously for Data General and HP have 
been cut, tested, and verified. Amazingly, my measurements were correct. 
So to summarize: XX2247 Code: 5173757 Use: DEC PDP-8 (all varieties), 
PDP-11 machines that do not use an ACE blank (11/24, 11/44)
Anyone have a reference on the depths of the Code values? There's 
another post with depths, but not explicitly calling out what each 
number equates to.
My master has a DND legend on the back, so I will need to get a copy cut 
and tested via codes, and will publish it when I find out that it works.
Dennis Boone post:
Allegedly Control Data used a National C415A on Network Processing Unit 
cabinets in the late 70s, early 80s. That's an Ilco 1069-N, cuts are 
12343 from bow to tip. Cut spacings are .156 .249 .342 .435 .528. Depths 
are 1=.250 2=.225 3=.200 4=.175.
The Boone post has numbers, but they make no sense WRT the post Jay 
posted (which has 7 depth values)
Also need to know if metric or inches.


More information about the cctalk mailing list