UniBone: Linux-to-DEC-UNIBUS-bridge, year #1

Chris Zach cz at alembic.crystel.com
Thu Nov 21 21:13:30 CST 2019


I *think* (and this is putting the wayback hat on) that the RH11 
originally was the controller for the RS03 and RS04 fixed head disk 
drives. The dual Unibus was so you could put them on Unibus A for 
talking to the 11/45's main bus with data transfers ripping across 
Unibus B directly to the dual-ported memory on the 45.

Thus one of the Unibus ports didn't need to worry about arbitration (it 
was the only thing on the bus) and could stream data from the (very 
quick) RS03/04's right into memory for the ultimate swap device.

The 2020 takes advanatge of this with the dual unibus adapter, one talks 
to the chatty stuff like the DZ11's, the other has no arbitration issues 
as it sucks data down from the faster spinning RM03s without timeouts.

One of my long term questions has been to see if a 2020 could talk to a 
RM80. It should be possible as the Massbus personality module talks to 
the bus at 3600 RPM just like the RM03, and they did manage to get the 
R80 to talk to the 11/730 with a dedicated memory channel connection 
(though maybe the R80 was heavily interleaved)

C

On 11/21/2019 9:14 PM, Noel Chiappa via cctalk wrote:
>      > maybe the two can be jumpered together (the way the two UNIBI in the
>      > KD11-A/D can).
> 
> Actually, now that I think about it, that might be the reason for the order
> of the UNIBUS A out B in/out slots in the backplane:
> 
>   https://gunkies.org/wiki/RH11_MASSBUS_controller#Backplane_layout
> 
> One of those thin M9200 UNIBUS jumpers could be used to connect the A out to
> the B in.
> 
> 
>      > Depends what you mean by "full-length"; no MUD (hex) slots, but yes to
>      > SPC slots (SPC)
> 
> Oooh, typo: 'SPC slots (quad)'
> 
> 	Noel
> 
> `
> 


More information about the cctalk mailing list