Decaying foam on PCBs
dkelvey at hotmail.com
Wed Aug 28 11:32:57 CDT 2019
I'm with Chuck on this one, I've use 91% on the foam gunk and it has worked. A similar product in the US is called GooGone. It can remove stenciled part labels and attacks some plastic.
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Jules Richardson via cctalk <cctalk at classiccmp.org>
Sent: Wednesday, August 28, 2019 4:44 AM
To: cctalk at classiccmp.org <cctalk at classiccmp.org>
Subject: Re: Decaying foam on PCBs
On 8/27/19 10:38 PM, Chuck Guzis via cctalk wrote:
> I'd probably just use 91% isopropanol. No water to speak of, doesn't
> bother plastics--and cheap.
I do normally use it on boards for general cleaning - I was just assuming
that this nasty sticky foam would be too much for it. I'll give it a go,
More information about the cctalk