Thicknet/10base5 Test Segment: The Cable is In!

Noel Chiappa jnc at mercury.lcs.mit.edu
Wed Jun 27 07:56:24 CDT 2018


    > the AMP coring tool ... doesn't screw in though ... I don't know if this
    > is consistent with the original 3 mbit Ethernet, as I've never worked
    > with that.

I was speaking of the gear used on the 3 Mbit. I don't recall the 10 Mbit
stuff at all.... I have this vague memory that the 3 Mbit cutter also had a
shoulder stop that prevented one going too deep.

	 Noel



More information about the cctalk mailing list