How to enable USB drives in both Windows 98SE AND MS-DOS 7.1.
terry at webweavers.co.nz
Wed Feb 7 22:14:02 CST 2018
>I thought there were alternate config.sys and autoexec.bat files that
were used if you chose to reboot to MS-DOS mode, and possibly if you hit F8
and chose command line during boot.
Yes, the files you speak of are config.dos and autoexec.dos. These
confused me at first because I thought just as you did. I put the driver
files in there. However, those files seem to be associated with the
PREVIOUS MS-DOS version (if one exists) prior to installation of Windows
98, NOT the CLI of Windows 98 (MS-DOS 7.1). There is an option when
starting Windows 98 to boot to an earlier version of MS-DOS. If this
earlier version is selected, then config.dos and autoexec.dos are read and
processed as config.sys and autoexec.bat for the DOS boot. Otherwise, if
booting the Windows 98 (MS-DOS 7.1) CLI, these files are ignored and only
autoexec.bat and config.sys (if they exist) are processed.
Initially, I thought booting to the previous DOS install (in my case MS-DOS
6.2) would solve the USB problem, and I simply called up the older DOS
(MS-DOS 6.2) with the drivers using those *.dos files. However, I was then
crippled by only being able to use a USB drive with FAT16 and a small
capacity. I needed an MS-DOS 7.1 environment to give me FAT 32 hence the
config.sys "menu" system.
On Thu, Feb 8, 2018 at 4:20 PM, Grant Taylor via cctalk <
cctalk at classiccmp.org> wrote:
> On 02/06/2018 12:58 PM, Terry Stewart via cctalk wrote:
>> The title might suggest to topic is not vintage, but the reason I did
>> this myself was to facilitate classic computer disk imaging.
> I'd think that something from ~20 years ago is indeed vintage. (It's
> closer to the 25 year old requirement for cards to be vintage, than not.)
> Just not quite as vintage as some of the other topics on cctalk.
> I’ve recently given USB drive capability to the MS-DOS 7.1 environment in
>> a Windows 98SE computer I use for the purpose above. It was a bit of work
>> configuring the machine to ensure both the MS-DOS drivers and the Windows
>> 98SE drivers co-existed peacefully.
> I figured that such was possible, but I've never tried.
> I'm no Windows 98 guru (or MS-DOS guru for that matter) so it may not be
>> the most efficient or elegant of solutions. However, it worked for me.
>> That being the case I thought I’d document what I did.
> I thought there were alternate config.sys and autoexec.bat files that were
> used if you chose to reboot to MS-DOS mode, and possibly if you hit F8 and
> chose command line during boot.
> Quick Google searches make me think that the MS-DOS mode files are named
> config.dos and autoexec.dos. Then Windows will rename them when you select
> reboot into MS-DOS mode.
> Hopefully the article will be useful to others who might want to do this.
> Thank you for sharing.
> I'm filing that away for future use.
> Grant. . . .
> unix || die
More information about the cctalk