sun model 47. code 4/40 does it have the nvram with battery?

Alan Perry aperry at snowmoose.com
Mon Dec 3 22:45:50 CST 2018


A company called RDI made the Britelite and Powerlite laptops. They 
eventually merged with Tadpole, which made its own SPARC laptops 
(SPARCbooks). As someone else mentioned, there were different Britelite 
models based on the various Sun lunchbox system boards. When I had my 
Britelite IPX on display on VCF, someone told me that they recognized 
the case as something used in another laptop.

Sun never made their own laptop, but they made a portable called the 
SPARCstation Voyager.

On 12/3/18 7:33 PM, ED SHARPE wrote:
> Very Nice collection! Yes  have to love that  laptop. Did not know  
> SUN made one. or  I  guess a third  party  put the  Sun  goodies in a 
> case of their  design?  either way   NEAT!
>
>
> Seeing   a  nice  run of  systems like this in wonderful condition  
> is  great!
>
>
> Ed#
>
> In a message dated 12/2/2018 5:49:49 PM US Mountain Standard Time, 
> cctalk at classiccmp.org writes:
>
> I will have to get back with you on the audio. It is on offline backup
> media and I need to find it.
>
> Here is a link to some photos of the exhibit -
> https://photos.app.goo.gl/7qC8UbEYCeCf9CBo7
>
> The RDI Britelite (laptop) is a SPARCstation IPX system board in a
> laptop chassis. It was in the Day 1 exhibit, but not the Day 2 exhibit
> because the power adapter died on the morning of the second day.
>
> One of the photos is an opened-up SPARCstation LX, which is very similar
> on the inside to your IPC.
>
> My exhibit next year will be on early 90s SPARC clones.
>
> alan
>
> On 12/2/18 1:43 PM, ED SHARPE via cctalk wrote:
> > Alan...   would   love  a  copy  of  the  audio  for  our archives  
> here.
> >
> >
> > Would  like to  see pix  of  your  display too  sounds neat!
> >
> > Any  other   files  text  or  otherwise  welcome  also  to  this  
> address   or  drop  us a   dropbox  link
> >
> > The  Sun  workstations  I  never  knew too much  about as at the 
> time   did not  seems  like  old  history  nor  did  we use any  so 
> playing catchup!
> >
> > Thanks in  advance...
> >
> > Ed#
> >
> >
> >
> > In a message dated 12/2/2018 12:44:32 PM US Mountain Standard Time, 
> cctalk at classiccmp.org <mailto:cctalk at classiccmp.org> writes:
> >
> >
> >
> > There is only room for drives in the top half of the chassis.  The PSU
> > and an assembly that holds the drives fills the top half. A 3.5"
> > half-height drive fits in one side of the assembly and a 3.5" floppy
> > drive fits in the other. The PSU cables go from the rear to the front of
> > that side of the chassis, below the FDD (when the chassis is closed).
> >
> > I did an exhibit on Sun lunchbox systems, including the IPC (4/40), for
> > PNW VCF earlier this year. I looked for press kits, posters, etc. to use
> > in the exhibit, but could only find text files. I know people who worked
> > at Sun on the development of those early SPARCstations and none of them
> > had any of that kind of material.
> >
> > I had an audio cassette "Introducing the IPC" for Sun sales. I donated
> > it to CHM this year (but I ripped the audio before I sent it to them).
> >
> > alan
> >
> > On 12/2/18 10:13 AM, ED SHARPE via cctalk wrote:
> >> Thanks  for the  info  to  get it  open!  when  back at the  
> office   shall   do that..   there  may  be  drives in 2 places -  on 
> board and  the off board  one. Always interesting to  explore  
> something   one  has  only  read  about!
> >>
> >>
> >>
> >> Along the   same  line  of  UNIX   stuff   we  have a COBALT   1U 
> Pretty  blue  sever and a  COBALT  CUBE.  I  do remember   lusting  
> after  one of these   1U  COBALT  servers when they  were  current 
> didn't  have anything in  the  budget back then  though  for  one.  I  
> have  been  told  SUN eventually ended up  owning COBALT.
> >>
> >> As  will all that   we    have  we  are  looking  for any  ad 
> slicks   press kits    posters,  wild artwork   for the  Sun $/40,    
> and the  2  COBALT  machines..
> >>
> >> Ed Sharpe archivist  for SMECC www.smecc.org <http://www.smecc.org>
> >>
> >>
> >>
> >>
> >> In a message dated 12/1/2018 8:15:39 PM US Mountain Standard Time, 
> aperry at snowmoose.com <mailto:aperry at snowmoose.com> writes:
> >>
> >>
> >> Yes. It is next to floppy in the upper half of the chassis. There 
> is a 50-pin (IDC connectors) ribbon cable that goes down to system 
> board at the bottom of the lower half of the chassis. The chassis 
> splits in the vertical middle in a, if looking at the chassis, fairly 
> obvious place. Because of the cables that run from the top to bottom, 
> it effectively hinges at the front of the chassis. There a couple 
> buttons on the side to release and sometimes a security cable bit to 
> remove (phillips screw).
> >>
> >> On 12/1/18 7:08 PM, ED SHARPE wrote:
> >> Hi  Alan - The  hard drive is same  size cabinet.... with  I  guess 
> a  SCSSI   cable.  I  will have  to  look  at it   further...   wonder 
> if starting it  out on  a  variac  would  help the capacitors  like  
> I  do  with the old radio sets  here in the museum  ed#
> >>
> >>
> >> In a message dated 12/1/2018 8:04:03 PM US Mountain Standard Time,
> >> aperry at snowmoose.com <mailto:aperry at snowmoose.com> writes:
> >>
> >> Well, as I said, in my experience, the NVRAMs that you can buy new 
> from Mouser work good enough. And the mod to the original battery 
> isn't that hard to make.
> >>
> >> In my experience with IPCs, the bigger problem is the power 
> supplies. If the PS on the IPC that you have now doesn't need to be 
> re'capped now, it will need it soon. After that will likely be the HDD 
> that needs work. Almost all of my HDDs that originally shipped with 
> lunchbox systems up to the 424 meg (ST1480N) have died. The price for 
> working 50-pin SCSI HDDs are at a point that SD2SCSI parts make more 
> sense (unless you want to exhibit them as they originally ran).
> >>
> >> alan
> >>
> >> On 12/1/18 6:55 PM, ED SHARPE wrote:
> >> BUMMER
> >> It may become a static  display.....
> >>
> >> Ed#
> >>
> >>
> >> In a message dated 12/1/2018 7:53:44 PM US Mountain Standard Time,
> >> cctalk at classiccmp.org <mailto:cctalk at classiccmp.org> writes:
> >>
> >> A 4/40 is a SPARCstation IPC. It used a M48T02 NVRAM for the IDPROM.
> >>
> >> Yes, one with the dreaded battery.
> >>
> >> alan
> >>
> >> On 12/1/18 5:04 PM, Ed via cctalk wrote:
> >>> we were given this and a hard dribe a floor standimg 
> decwriter..... does this use NV ram with dreaded battery? thanks,ed
> >>>
> >>> Sent from AOL Mobile Mail
>



More information about the cctalk mailing list