Help ID'ing Bridge Rectifier

[W2HX]

I agree with chuck.


73 Eugene W2HX


-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Chuck Guzis via cctalk
Sent: Sunday, August 12, 2018 7:16 PM
To: Josh Dersch via cctalk
Subject: Re: Help ID'ing Bridge Rectifier

I would think, looking at the schematic that any 2A 600V bridge would do
in this position.  If you wanted some error margin, the 4A 600V.

--Chuck





On 08/12/2018 03:04 PM, Josh Dersch via cctalk wrote:
> Hey all --
> 
> Working on bringing a Dasher D200 terminal back to life.  There's a bridge
> rectifier package that appears to have a short in it and I can't find any
> info on it -- I suspect it may have a house part number.  It's got a
> Motorola logo on it, and is labeled "SDA314."  In the schematic (
> http://bitsavers.org/pdf/dg/terminals/014-000640_DASHER_D100_D200_Display_Terminals_Users_Manual_Oct79.pdf)
> it's CR6.
> 
> This short causes the 5W resistors before the fuse to smoke and explode,
> but the fuse is fine (thank goodness.) :).
> 
> Anyone have any ideas?
> 
> Thanks,
> Josh
>