KDF 8189 processor board foobared (ebay warning)

Henk Gooijen henk.gooijen at hotmail.com
Sun May 21 03:40:25 CDT 2017




Van: jim stephens via cctalk<mailto:cctalk at classiccmp.org>
Verzonden: zaterdag 20 mei 2017 23:59
Aan: allison<mailto:allisonportable at gmail.com>; General Discussion: On-Topic and Off-Topic Posts<mailto:cctalk at classiccmp.org>
Onderwerp: Re: KDF 8189 processor board foobared (ebay warning)



On 5/20/2017 7:01 AM, allison via cctalk wrote:
> Argh,  CPU chips used on dec board loose value as the complete board
> carries the value.
>
> KDF with the second chip is useful but the logic needed to may a "CPU"
> of the raw chips is not trivial.
That was what I figured.  Hopefully the lister will put the two back
together, but has not done so for now.  he did bring down the price per
my suggestion he had messed up the value by pulling the chip.
> Best chip for hacking and useful off a board (Falcon, KXT11, RQDX,
> others) is the T11.  Its easily
> useful like a 8085 or Z80.
I've got two boards with T-11's very nice.  The T-11's listed right now
were higher in cost than the KDJ processor I have, and I have a full
page archived with the project to bring it up.  Just seemed like an
interesting project for sometime.

Thanks
Jim


Pete McCollum did a project based on the T11. It is a small PCB
with less than 10 ICs. He implemented a Forth environment on it.
I joined that project, but have not done anything with the hardware
till now  ☹   That will change when I retire in 7 years (haha) . . .


More information about the cctalk mailing list