DEC M9312 Configs for a 11/40

Josh Dersch derschjo at gmail.com
Sat Nov 26 13:16:44 CST 2016


I'll note that the W8 setting described on page A-2 seems to conflict with
the description earlier in the manual (See section 2.8.3) which indicates
it's only necessary for it to be IN if there is an address conflict (which
is probably not the case).  Leave W8 OUT.  (Leaving W8 in will disable the
console PROM).  Sorry for the confusion...

- Josh


On Sat, Nov 26, 2016 at 11:09 AM, Josh Dersch <derschjo at gmail.com> wrote:

> I can take some pictures of the M9312 I have running in my 11/40 tonight
> if need be.  The manual at http://bitsavers.informatik.
> uni-stuttgart.de/pdf/dec/unibus/M9312_TechRef.pdf (page A-2) suggests
> that W8 should be IN.
>
> Can you describe how your system is configured (i.e. what's on the bus,
> what's in the CPU, etc?).
>
> Have you double-checked that the interrupt vectors for your SLUs are
> correctly configured?  The console (and BASIC, IIRC) does not use
> interrupts for serial I/O and will work if the vector is misconfigured (I
> discovered this the hard way in my 11/05) but other things will not and
> will behave badly.
>
> I'd also suggest using PDP11GUI to load in diagnostics directly, this
> avoids needing to be able to boot XXDP...
>
> - Josh
>
>
> On Sat, Nov 26, 2016 at 9:58 AM, william degnan <billdegnan at gmail.com>
> wrote:
>
>> >
>> >
>> > 2) Yes or no - Should W8 be in for am 11 40/25/10/05 or is the /40
>> > special?
>> >
>> >
>> >
>> TYPO - I mean "11 40/35/10/05" or is the /40 special?
>>
>> b
>>
>
>


More information about the cctalk mailing list