ISO: PDP-11/40 LTC and Stack Limit options

william degnan billdegnan at gmail.com
Wed Nov 23 12:00:51 CST 2016


On Wed, Nov 23, 2016 at 12:39 PM, Henk Gooijen <henk.gooijen at hotmail.com>
wrote:

>
>
>
> Van: Guy Sotomayor Jr<mailto:ggs at shiresoft.com>
> Verzonden: woensdag 23 november 2016 17:29
> Aan: General Discussion: On-Topic and Off-Topic Posts<mailto:cctalk@
> classiccmp.org>
> Onderwerp: Re: ISO: PDP-11/40 LTC and Stack Limit options
>
>
> > On Nov 23, 2016, at 7:11 AM, william degnan <billdegnan at gmail.com>
> wrote:
> >
> >
> > 3) I would not mind getting something like Guy's UA11 to test with.  Are
> > these available?
> >
>
> Yes, they are still available (along with KM11s)
>
> TTFN – Guy
> ------
> I soldered my two KM11’s last Sunday!
> I bought them from you at least eight years ago!
>
> Going to put them to good use solving issues in my 11/10 and 11/40 …
>
> BTW, my 11/35 booted from RL02. But at the moment the 11/35 has issues ☹
> Regarding an SLU in slot 9: AFAIR, the M7800 does not use nor connect NPR,
> So the M7800 will go well in slot 9 regardless of BG and NPR present or
> not.
>
>
Please advise the order form/whatever to read about and if applicable order
a UA11, thanks

BTW - I put a 7800 (9600b) in my 11/40 in slot 9, works.  I usually have
the serial card in my 11DD-B backplane, slot 1.

b


More information about the cctalk mailing list