Model 152 PSU dummy loads - Re: NeXT Cube - powers on briefly then off again

Ian Finder ian.finder at gmail.com
Mon Oct 26 12:23:16 CDT 2015


This thread took a turn for the absurd. Oil? Water? What a practical bunch of people. /s

They make resistors with adequate cooling... Almost as if they're rated for a certain number of watts of dissipation and you can buy them based on that. They are resistors after all. 

And if they overheat-- oh wait, they're heavy duty resistors, not ICs. Get a couple, put them in a metal project box, put it inline with the cable, and call it a day.

Sent from my iPhone

> On Oct 26, 2015, at 09:24, simon <simski at dds.nl> wrote:
> 
> please skip this ridicule and grab yourself a couple of headlights from a car.
> 
> 
> 
>> On 26-10-15 17:16, Dale H. Cook wrote:
>> My recommendation of oil is based upon my decades of experience with broadband dummy loads from 60 watts to 2.5 kilowatts. The dummy loads that I have worked with for medium wave and below and from 5 kilowatts down have all been convection air cooled. Broadband dummy loads that I have used for higher powers (up to 25 kilowatts) have been forced air cooled.
>> 
>> I prefer to stick with what I have experience with. As for water, YMMV.
>> 
>> Dale H. Cook, Radio Contract Engineer, Roanoke/Lynchburg, VA
>> http://plymouthcolony.net/starcityeng/index.html
> 
> -- 
> Met vriendelijke Groet,
> 
> Simon Claessen
> drukknop.nl


More information about the cctalk mailing list