Source for 3M Bumpons

Chris Halarewich halarewich at gmail.com
Tue Oct 13 02:32:25 CDT 2015


http://www.tgoldkamp.com/catalogsearch/result/?q=sj5023


http://www.tgoldkamp.com/3m-153-bumpon-153-protective-products-sj5780-black.html

On 10/12/15, Ali <cctalk at fahimi.net> wrote:
>> Do they have to be 3M?  i.e., Do you see anything close here?
>>
>> https://www.westfloridacomponents.com/RubberFeet.html
>
> Chuck,
>
> If I skip the 3M portion requirement the I and have found replacements for
> reasonable price and quantity here: http://www.bumperspecialties.com/.
>
> I am not sure if it is a patent issue or what but the 3M parts are much
> less
> tapered. Specifically while both the 3M and the clones had a 0.81"x0.81"
> base the top of the feet are much smaller on the clones. The 3M parts are
> 0.563"x0.563"while the clones are 0.400"x0.400". The original parts had the
> 0.563" top base measurement.
>
> If I cannot find the 3M in reasonable quantity then I will go with the
> clone
> close match.
>
> -Ali
>
>
>


-- 
Chris Halarewich


More information about the cctalk mailing list