Recommendation for a PROM burner

Jon Elson elson at pico-systems.com
Sun Mar 15 14:51:49 CDT 2015


On 03/15/2015 10:53 AM, Jon Elson wrote:
> On 03/15/2015 10:46 AM, Paul Koning wrote:
>>> On Mar 15, 2015, at 11:38 AM, Noel Chiappa 
>>> <jnc at mercury.lcs.mit.edu> wrote:
>>>
>>> ...A few points:
>>>
>>>> From: Jon Elson
>>>> You won't find ANYTHING that supports 1702 devices, 
>>>> they needed 80 V to
>>>> program.
>> 48 volts, according to a 1702A datasheet I just dug up 
>> with Google.
>>
>>
> OK, but the device programmer I had for them had, as best 
> I remember, and 80 V
> power supply.  Seems a bit high, and it HAD been a while, 
> but that's what I remember.
> So, yes, the voltage at the chip was lower.
>
> Jon
>



More information about the cctalk mailing list